WPA4220 Management Utility won't connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WPA4220 Management Utility won't connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WPA4220 Management Utility won't connect
WPA4220 Management Utility won't connect
2015-03-03 04:01:29
Region : Argentina

Model : TL-WPA281

Hardware Version : V1

Firmware Version :

ISP :


Hi,

I opened and plugged my new WPA4220. It paired successfully to my two other PA451s. I haven't plugged the network cable yet as wanted to set up the wireless extender first. But then got a problem - the Management Utility won't recognise it and I'm unable to connect. The Management Utility list of devices discovered is empty and rescanning does not help. In the mean time the powerline LED shows the connection to the power network is fine. Tried another wall socket but still no luck.


Can anyone recommend what else needs to be done?
  0      
  0      
#1
Options
1 Reply
Re:WPA4220 Management Utility won't connect
2015-03-04 15:00:33
Did you run the utility for WPA4220?
Uninstall it. Download the one as below and reinstall it. http://www.tp-link.com/en/support/download/?model=TL-WPA4220&version=V1#tbl_b
If it is the same, you'd better try a different computer. Or try to configure a static IP on your PC to login its web interface.
Manually configure the static IP address (192.168.1.100) and subnet mask (255.255.255.0) and try to login http://192.168.1.1. You may need to reset WPA4220 first.
  0  
  0  
#2
Options