Home Network Community > Deco > Mixing Deco P9 delivered in a package of 3 pieces with more Deco P9 from another package
< Deco

Mixing Deco P9 delivered in a package of 3 pieces with more Deco P9 from another package

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Mixing Deco P9 delivered in a package of 3 pieces with more Deco P9 from another package

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Mixing Deco P9 delivered in a package of 3 pieces with more Deco P9 from another package
Mixing Deco P9 delivered in a package of 3 pieces with more Deco P9 from another package
2025-04-23 10:55:57 - last edited 2025-04-28 06:25:12
Model: Deco P9  
Hardware Version: V1
Firmware Version:

I have bought several P9 packages of 3 P9 each. Since I have sold my House I want to use several P9 (more than 3) in the same Wi/Fi Net, which means I have to add one P9 as the fourth an Fift P9 in the same Wi/Fi Net. Since the 3 P9 are defined to work together the fourth comes from another package is not pree-defined to work by the first 3. When I press the reset (in the bottom) the diod results into a fixed Yellow glow. Even if I continue press the reset it remain ixed Yellow glow, but ought to switch to fixed blue i guess. Can anyone please help me and tell what to do. Sorry my English is SvEnglish due to I am a Swede.

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Mixing Deco P9 delivered in a package of 3 pieces with more Deco P9 from another package-Solution
2025-04-24 06:56:54 - last edited 2025-04-28 06:25:12

  @Kvicken 

Hi, how long have you held the reset button? Usually, it should be only 1s.

You can swap the power adapter with another Deco, then power restart it again, then hold the reset button for 1s.

If the LED is still solid yellow, it is recommended to refer to this link to check whether it can get into firmware recovery mode:

How to use firmware recovery if the Deco become brick

 

 

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Mixing Deco P9 delivered in a package of 3 pieces with more Deco P9 from another package-Solution
2025-04-24 06:56:54 - last edited 2025-04-28 06:25:12

  @Kvicken 

Hi, how long have you held the reset button? Usually, it should be only 1s.

You can swap the power adapter with another Deco, then power restart it again, then hold the reset button for 1s.

If the LED is still solid yellow, it is recommended to refer to this link to check whether it can get into firmware recovery mode:

How to use firmware recovery if the Deco become brick

 

 

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 158

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.