Transfer from software controller to OC200 : what about versions compatibility ?
I installed an network and all the configuration with a software controller, version v5.15.20.19.
I would like now to transfer it on an Omada OC200 hardware controler, but the last available version is v5.15.8.12.
It is strongly recommended to transfer the configuration (through backup and restore on the other side) only with same versions, does anyone has infos or might help ?
Thanks !
Chris
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
For controller versions 5.13.11.41 and higher, controller migration is supported only when importing a configuration file from a controller with the same Major.Minor.Patch version number (e.g., 5.13.11).
For current OC200 and software controller, both of their latest firmware version are 5.15.20.x, so as long as they are in the latest firmware version, you can migrate them directly.
Below is a guide:
How to migrate Omada Controller with the Migration feature
- Copy Link
- Report Inappropriate Content
For controller versions 5.13.11.41 and higher, controller migration is supported only when importing a configuration file from a controller with the same Major.Minor.Patch version number (e.g., 5.13.11).
For current OC200 and software controller, both of their latest firmware version are 5.15.20.x, so as long as they are in the latest firmware version, you can migrate them directly.
Below is a guide:
How to migrate Omada Controller with the Migration feature
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
OC200 has 5.15.20.38 available here
https://support.omadanetworks.com/en/product/oc200/v1/?resourceType=download
This will happily accept a config backup from any other controller of version 5.15.20.whatever
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 396
Replies: 4
Voters 0
No one has voted for it yet.