WR741ND Issue with WDS to a WR740N when use Port Forwarding (Web access)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WR741ND Issue with WDS to a WR740N when use Port Forwarding (Web access)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WR741ND Issue with WDS to a WR740N when use Port Forwarding (Web access)
WR741ND Issue with WDS to a WR740N when use Port Forwarding (Web access)
2015-07-09 04:15:23
Region : UnitedStates

Model : TL-WR741ND

Hardware Version : V4

Firmware Version : TL-WR741ND_V4.20_150119

ISP : net


Hi,
i have a WR741ND connect via WDS to a WR740N that have connectivity to a Internet modem .
The WDS Feature is working fine but the issue that i have is when i'm trying to access the TP-LINK that is connected via WDS by the internet using PORT FORWARDING like a dyndns.net:2002 for example Dont Work.

The strange part is that a colleague have the same configuration with an Archer C7 connected into the internet and a WR841N connected via WDS have the same problem.

If i try to access the WR-740N (the first TP-LINK connected into the Internet modem) works fine using dynsdns.net:2001 , but when try to access the second one (WR-741ND - via WDS) dyndns.net:2002 not work .
The remote management is configured with 2002 port and internally (LAN) it's working fine.

I tried to use PORT FORWARDING in different ways or ports but didn't work on the second one .
The strange is that i access a lot of devices using port forwarding for the ones connected into the fisrt TP-LINK (WR-740N).
Both TP-Links are running with the last firmware version.

Do you know how to make this access to the second TP-LINK works by the web passing through the first TP-LINK ?
Follow the topology that show details about the connection.



  0      
  0      
#1
Options
6 Reply
Re:WR741ND Issue with WDS to a WR740N when use Port Forwarding (Web access)
2015-07-09 16:15:39
Try to open port 2002 for 192.168.1.10 on WR740 and open port 2002 for 192.168.3.2 on your modem.
  0  
  0  
#2
Options
Re:WR741ND Issue with WDS to a WR740N when use Port Forwarding (Web access)
2015-07-10 08:16:44
Hi, I already opened on the modem ports 2001 and 2002, but when try to access the last TP-LINK (WR741ND) didn't work .

Tried to change the port that access the WR740N from 2001 to 2002 just for test and worked fine using 2002, but when try to access the WR741ND passing through the WR740N didn't work .
  0  
  0  
#3
Options
Re:WR741ND Issue with WDS to a WR740N when use Port Forwarding (Web access)
2015-07-10 11:48:35
Did you open port 2000 for 192.168.1.10(WR741ND) on WR740N?
  0  
  0  
#4
Options
Re:WR741ND Issue with WDS to a WR740N when use Port Forwarding (Web access)
2015-07-13 20:33:18

Vivian wrote

Did you open port 2000 for 192.168.1.10(WR741ND) on WR740N?


Yes, i already opened the port 2002 on the 192.168.1.1 and also on the 192.168.1.10, but access from web not work .

The strange part is that a colleague with the same infrastructure but using as the first TP LINK Archer C7 and the last WR841ND (both with last firmwares) didn't work also.
  0  
  0  
#5
Options
Same Issue
2015-09-25 07:48:06
Hi, I have the same scenario using two routers WR740N, and I found the same problem.

You found a solution for this ?

Thks
  0  
  0  
#6
Options
Re:WR741ND Issue with WDS to a WR740N when use Port Forwarding (Web access)
2015-10-02 20:24:52
After check some other internet forums and test in other devices, the issue is when you use the bridge mode on the second TPLINK, juts will work if you use as routed instead of bridged.
  0  
  0  
#7
Options