Dear all,

I recently changed my home wifi system from Asus to TP-Link, purchased 2 new GE800, one as main router & the other as satellite via EasyMesh (10G wire-connected), overall the new system is working fine except with a few issues as follows:

1. The satellite GE800 LED color scheme does not follow the main router's, the satellite just with red wave-like color all the way.

2. MLO is basically working when connected to the main router but slow vs Wifi6, even when my mobile (Samsung S25 Ultra) was at the same place near the main router (about 2m apart) to test.

3. When my mobile is placed close to the satellite GE800 (6m from the main router), MLO connection does not switch to the satellite (ie still connect with the main router), whereas 2.4G / 5G wifi does switch to satellite.

Other than no switching to satellite under MLO, disconnect wifi then reconnect does not make a difference, seems MLO is not functioning at the satellite.

4. Tried to connect Oppo AX5400 (EasyMesh compatible) as another satellite, not successful after various attempts (WPS, wired). Seems not compatible?

5. Noted lately there's a new pre-release of firmware available, hope some / all of the aforesaid have been addressed. Anyway when will the official release be available?

Best Regards,

KLAM