The extander light is not blinking properly and the network of the extander is not shown in devices
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wifi entender is not connected in any devices
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi@Priyansh,
Thank you for contacting our community.
If your Range Extender can't be powered on properly, not responding to reset or repeat to reboot itself, please refer to the following suggestions:
1. Please plug the extender into another power socket.
2. Hold the reset pinhole until all the lights turn on for one second, then off.
Note: If the reported models are RE220 V3/RE200 V5/RE190 V5, always repeat to reboot, after trying the above troubleshooting methods, please refer to RE220/RE200/RE190 Keeps Restarting Automatically for further suggestions.
If still same, please contact local technical support.
- Copy Link
- Report Inappropriate Content
Hi@Priyansh,
Thank you for contacting our community.
If your Range Extender can't be powered on properly, not responding to reset or repeat to reboot itself, please refer to the following suggestions:
1. Please plug the extender into another power socket.
2. Hold the reset pinhole until all the lights turn on for one second, then off.
Note: If the reported models are RE220 V3/RE200 V5/RE190 V5, always repeat to reboot, after trying the above troubleshooting methods, please refer to RE220/RE200/RE190 Keeps Restarting Automatically for further suggestions.
If still same, please contact local technical support.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 186
Replies: 1
Voters 0
No one has voted for it yet.