Deco XE75 Pro and local fibre provider BRSK - Recent speed issues
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I've had a 4 unit Deco XE75 Pro mesh set up for nearly two years. It's been very good. The main unit is plugged directly into the BRSK (fibre provider) ONT.
Recently, BRSK performed 'maintenance' on their service and since that point, speeds and stability have been dreadful on both wired and wifi connections.
Pings timing out, speed tests ranging from 0 to 900 (it's a 1Gbps service, up and down). I've tried reading posts here, disabling QoS and changing DNS servers etc. Nothing is helping.
The only solution I've found is to place the XE75 into AP mode and putting the original BRSK router between the ONT and the XE75
I'd rather not have yet another box plugged in somewhere just to solve a problem, does anyone have any steer on what I can try to do to get to the bottom of the issue?
Clearly something has changed on the BRSK network making the XE75>ONT connection unreliable. BRSK won't help as it's not their hardware from the ONT inward (the XE75).
Hi, thank you very much for the update.
May I know how long you have had the Deco XE75 Pro?
In case there is anything wrong with the current main Deco, it is suggested to refer to this link to replace a new Deco as the main Deco:
How to replace the main Deco with another Deco
Can I also have some screenshots of the current network topology, such as:
Wait for your reply.
Best regards.
