TP-Link Archer C80 keeps disconnecting
Today I bought a Tp link c80 US V2. I'm facing problems with it.
1. Sadly, it keeps disconnecting from wifi and won't connect for some time.
2. If two or more mobiles connect it gets stuck and 2.4ghz or 5ghz both don't connect.
Please help 🙏
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi@MunnaVi,
Thank you for contacting our community.
Did you check the wired connection of the router? Is it working normally?
If only the wireless connection is unstable, please try the following suggestions:
1) Make sure the Router is properly placed; it should be put in an open area instead of inside a cabinet or shelf.
2) Change the wireless channel to another one. You may refer to Changing Channel and Channel Width on a TP-Link Router (new logo).
3) Change channel to avoid interference. For 2.4GHz wireless client devices, adjust the 2.4GHz channel width to 20MHz; for 5 GHz wireless client devices, adjust the 5GHz channel width to 80MHz or 40MHz, etc.
- Copy Link
- Report Inappropriate Content
Hi@MunnaVi,
Thank you for contacting our community.
Did you check the wired connection of the router? Is it working normally?
If only the wireless connection is unstable, please try the following suggestions:
1) Make sure the Router is properly placed; it should be put in an open area instead of inside a cabinet or shelf.
2) Change the wireless channel to another one. You may refer to Changing Channel and Channel Width on a TP-Link Router (new logo).
3) Change channel to avoid interference. For 2.4GHz wireless client devices, adjust the 2.4GHz channel width to 20MHz; for 5 GHz wireless client devices, adjust the 5GHz channel width to 80MHz or 40MHz, etc.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 247
Replies: 1
Voters 0
No one has voted for it yet.