WiFi 7 SSID is not listed in my Phone's wifi list
DEARS.
I'am from Hyderabad, India and I purchased an ARCHER BE900 V2 Router ONLINE. It has to 5G SSIDs, 1 2.4G and 1 6G SSIDs. All are working fine but, Wifi 7 SSID is not showing in my devices (Samsung Galaxy S25 Ultra, DELL XPS 16, iPhone 16 Pro Max & Macbook Pro 2024) as all are compatible with WIFI 7 standard.
Also, my 5G connections are seems sleeping some times. I won't get internet with the connected one. I need to change it to another 5G-2 SSID.
Can anyone show me a relief me please..?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello@CHSreenu ,
Welcome to our community.
Do you mean that your devices can only detect 2.4 GHz or 5 GHz? Please follow the troubleshooting steps below:
1. Make sure the 6G network is enabled and not hidden; you may check this on the Tether APP > More > Wi-Fi Settings.
2. Make sure your client device supports 6G Wi-Fi, drivers and system are all up to date.
3. Make sure you are using the Router and the client device in a country that allows Wi-Fi 6E/7 operation. If your Router and client device are not purchased from the same country, Wi-Fi 6E operation might not be available.
You could refer to this article for more detailed instructions: What if my device failed to detect the 6 GHz Wi-Fi Band
- Copy Link
- Report Inappropriate Content
Hello@CHSreenu ,
Welcome to our community.
Do you mean that your devices can only detect 2.4 GHz or 5 GHz? Please follow the troubleshooting steps below:
1. Make sure the 6G network is enabled and not hidden; you may check this on the Tether APP > More > Wi-Fi Settings.
2. Make sure your client device supports 6G Wi-Fi, drivers and system are all up to date.
3. Make sure you are using the Router and the client device in a country that allows Wi-Fi 6E/7 operation. If your Router and client device are not purchased from the same country, Wi-Fi 6E operation might not be available.
You could refer to this article for more detailed instructions: What if my device failed to detect the 6 GHz Wi-Fi Band
- Copy Link
- Report Inappropriate Content
Hello @CHSreenu ,
We are delighted to announce the pre-release firmware for the Archer BE900 V2! This update has new advanced features. It is recommended that you try this firmware and take advantage of the new features.
New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More
Any feedback and suggestions are welcome~
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 670
Replies: 2
Voters 0
No one has voted for it yet.