Home Network Community > Powerline Adapters > AV600 not receiving
< Powerline Adapters

AV600 not receiving

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AV600 not receiving

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AV600 not receiving
AV600 not receiving
2025-07-18 19:06:08 - last edited 2025-08-08 06:17:47
Model: TL-WPA4220 KIT  
Hardware Version: V5
Firmware Version:

Hi All,

 

I've just bought Powerline Wi-fi Extender, the Adapter is plugged into the Starlink modem via ethernet, the extender is in the same room on the same ring main. after pairing, the three Leds (except the ethernet indicator) come on after a while go off, the power one flashes then they come on again and the whole process is repeated. I've tried pairing them again and resetting using a paperclip but it doesn't seem to be working, any advice would be appreciated

 

Thanks

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:AV600 not receiving-Solution
2025-07-22 08:06:28 - last edited 2025-08-08 06:17:47

Hello@Merlopilot ,

Welcome to our community.

 

If your powerline adapter is having self-rebooting issues, please try the suggestions below:
1. Try plugging the adapters into different wall outlets to rule out any electrical issues.
2. Ensure that your Powerline adapter is running the latest firmware. Instructions for updating can be found here:How to update the firmware using tpPLC Utility (new logo)
3. Reset the powerline devices to factory settings and reconfigure them. 

  • How to reset:
    • For TL-PA4010 (the models which start with TL-PAxxxx), press and hold the Pair button for 15s until all LEDs turn off and then come back on.
    • For TL-WPA4220 (models beginning with TL-WPAxxxx), press and hold the Reset button for 10s. Release the button and all LEDs turn off. When the LEDs turn back on, the reset process is complete.
  • How to configure:How to secure (pair) the Powerline Network
Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More △New Firmware for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:AV600 not receiving-Solution
2025-07-22 08:06:28 - last edited 2025-08-08 06:17:47

Hello@Merlopilot ,

Welcome to our community.

 

If your powerline adapter is having self-rebooting issues, please try the suggestions below:
1. Try plugging the adapters into different wall outlets to rule out any electrical issues.
2. Ensure that your Powerline adapter is running the latest firmware. Instructions for updating can be found here:How to update the firmware using tpPLC Utility (new logo)
3. Reset the powerline devices to factory settings and reconfigure them. 

  • How to reset:
    • For TL-PA4010 (the models which start with TL-PAxxxx), press and hold the Pair button for 15s until all LEDs turn off and then come back on.
    • For TL-WPA4220 (models beginning with TL-WPAxxxx), press and hold the Reset button for 10s. Release the button and all LEDs turn off. When the LEDs turn back on, the reset process is complete.
  • How to configure:How to secure (pair) the Powerline Network
Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More △New Firmware for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 330

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.