Home Network Community > Wi-Fi Routers > Losing internet 4 to 5 times a week since update 1.4.2
< Wi-Fi Routers

Losing internet 4 to 5 times a week since update 1.4.2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Losing internet 4 to 5 times a week since update 1.4.2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Losing internet 4 to 5 times a week since update 1.4.2
Losing internet 4 to 5 times a week since update 1.4.2
2025-07-19 17:57:50 - last edited 2025-08-04 02:47:53
Tags: #Firmware Update
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.0

Hi everyone,

 

  Is it only me or since update 1.4.2 my AX6000 is losing internet without recovering from it 4 to 5 times a week. I use it with a VPN and I get the error Tunneling connection failed when I try to access the router from lan. Even the theter app don't see it if I try to connect to it from my cellular data. I must manuelly reboot it with the power button. This became annoying as I'm working from home and it fail randomly during the day or night.

 

Thank you have a great day

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Losing internet 4 to 5 times a week since update 1.4.2-Solution
2025-08-01 20:50:37 - last edited 2025-08-04 02:47:53

  @Joseph-TP Thank you for your response.

 

  My AX6000 is in router mode and it's been working well until this update. After some research I found a beta version 1.4.3. I updated to this version and I stopped having this problem. Nothing has changed or been touched in months appart this update that has been done two weeks ago. I seem to be alone with this problem but it is now resolved.

 

Thank you

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:Losing internet 4 to 5 times a week since update 1.4.2
2025-07-22 01:31:36 - last edited 2025-07-22 01:34:12

Hello@PhilippeR ,

Welcome to our community.

 

Is the router AX6000 working in Access Point mode? If yes, please refer to Archer AX6000 v1 Access Point Mode not working after firmware update to 1.4.2

If it is working in wireless router mode and router Internet LED turns red/orange occasionally: 
    1) Connect a PC directly to your modem to verify if your ISP's Internet is stable.

    2) Ensure the Ethernet cable connecting your modem to the Router is properly connected, and replace old wires with new ones.
    3) Change the DNS Server of the Router, log in to the web management interface of the Router, go to Advanced > Network > Internet > Advanced Settings, and change the two DNS Servers to 1.1.1.1 and 8.8.8.8. How to Change the DNS servers on the wireless router and DSL modem router (New UI)?
 

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE400 V1 to Support IPv6 VPN, Wake On LAN, and More △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#2
Options
Re:Losing internet 4 to 5 times a week since update 1.4.2-Solution
2025-08-01 20:50:37 - last edited 2025-08-04 02:47:53

  @Joseph-TP Thank you for your response.

 

  My AX6000 is in router mode and it's been working well until this update. After some research I found a beta version 1.4.3. I updated to this version and I stopped having this problem. Nothing has changed or been touched in months appart this update that has been done two weeks ago. I seem to be alone with this problem but it is now resolved.

 

Thank you

Recommended Solution
  0  
  0  
#3
Options
Re:Losing internet 4 to 5 times a week since update 1.4.2
2025-08-04 02:53:37

Hi@PhilippeR ,

Thanks for sharing.

I am glad to hear that your issue has been resolved.

Please feel free to contact us if you have further questions.

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE400 V1 to Support IPv6 VPN, Wake On LAN, and More △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 441

Replies: 3

Tags

Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.