Home Network Community > Mobile Wi-Fi > device blocked, all the lights on
< Mobile Wi-Fi

device blocked, all the lights on

device blocked, all the lights on

device blocked, all the lights on
device blocked, all the lights on
2025-08-01 18:07:27 - last edited 2025-09-16 01:28:27
Tags: #m7200,loop,reboot,reset no works
Model: M7200  
Hardware Version: V3
Firmware Version:

Hi, the 3 lights stay on and flash once every 15 seconds or so, while charging it does the same thing even without a battery. When I connect it to my PC it keeps disconnecting, I can't access it via USB or even via WiFi, it's as if it can't start up. I tried to reset it, but it doesn't work, the reset doesn't start, the lights always stay on.

Can anyone help pls?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:device blocked, all the lights on-Solution
2025-08-04 09:21:29 - last edited 2025-09-16 01:28:27

  @Melomelo 

Hi, welcome to the community.

May I know how long you have had M7200?

It is suggested to refer to this post to run a firmware recovery:

Firmware Recovery Tools: Fixing Boot Loop on M7200/7350/7450/7650

 

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:device blocked, all the lights on-Solution
2025-08-04 09:21:29 - last edited 2025-09-16 01:28:27

  @Melomelo 

Hi, welcome to the community.

May I know how long you have had M7200?

It is suggested to refer to this post to run a firmware recovery:

Firmware Recovery Tools: Fixing Boot Loop on M7200/7350/7450/7650

 

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 240

Replies: 1

Tags

m7200,loop,reboot,reset no works
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.