Deco P9 with TP-Link CPE210 Outdoor Access Point

Deco P9 with TP-Link CPE210 Outdoor Access Point

Deco P9 with TP-Link CPE210 Outdoor Access Point
Deco P9 with TP-Link CPE210 Outdoor Access Point
2025-08-01 18:30:35
Model: Deco P9  
Hardware Version:
Firmware Version:

I need to add a bridge of about 400mg between my home Deco system (P9 and X50) to the edge of yard for telecamera. Can I add a bridge system such as TP-Link CPE210 Outdoor Access Point to my Deco network?

  0      
  0      
#1
Options
1 Reply
Re:Deco P9 with TP-Link CPE210 Outdoor Access Point
Friday

  @Jlong 

Hi, thank you very much for your time and patience.

Do you plan to use a pair of CPE210s to establish an AP-Client bridge(https://www.tp-link.com/en/support/faq/2575/) between two Deco units?

It is not recommended as CPE210 is 2.4GHz only, the Mesh Quality would be highly affected.

Or do you plan to connect the Tele camera directly to the Client CPE210, such as:

Deco----<Ethernet cable>----CPE210(AP mode)-----WiFi------CPE210(Client mode)-----<Ethernet cable>----tele camera

Thanks a lot.

Best regards.

 

 

 

  0  
  0  
#2
Options