Model : TD-W8960N

Hardware Version : V5

Firmware Version : 1.1.1 Build 141107 Rel.34856

ISP : Telecom Italia

My router has IP address : 192.168.1.1
the firmware is the last one available 1.1.1 Build 141107 Rel.34856
I have a camera with IP CAM server
This camera has an ip : 198.168.1.103
the server of this camera runs on port 1025 (I tried on other doors ) .
I access the browser correctly to this camera and its server using the address 198.168.1.103:1025


I enabled the virtual server by enabling port 1025 traffic < TCP / UDP > .
I did some testing with http://www.yougetsignal.com/tools/open-ports/
and port 1025 is open correctly .


Outside the router has a public address
x.y.z.k


if you try to access the camera by going to the browser
with x.y.z.k 1025


I can not access the camera .
I did not do it antivirus firewall active .


You can provide support
Thank you