X50 main x60 satellites.

X50 main x60 satellites.

X50 main x60 satellites.
X50 main x60 satellites.
2025-08-03 13:54:08 - last edited 2025-08-11 01:59:25
Model: Deco X50  
Hardware Version:
Firmware Version: 1.6.7 Build 25031412 rel 48242

Changed my main unit to an x50.  Now all traffic drops every 60 seconds  Reconnects right away. 
charged it back to x60 main and all is good

made sure all firmware is updated. 
running a direct link from isp device to tv proved isp side is ok

i am sure it is a setting but can't find it. 
I don't have iptv. Not sure if vlan setting could cause this

 

please help!

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:X50 main x60 satellites. -Solution
2025-08-10 19:27:51 - last edited 2025-08-11 01:59:25

DNO-47 wrote

David-TP wrote

  @DNO-47 

Hi, welcome to the community.

May I know your internet service provider?

Would the main Deco X50 turn red during the disconnection?

 

"Now, all traffic drops every 60 seconds.  Reconnects right away. "

-Did you check it in the web system log?

It is also highly appreciated if you can save a copy of the web UI system log and forward it to support.forum@tp-link.com

Subject:

 [Forum Escalation][ID 835914] Deco X50 Random Disconnection

 

Wait for your reply.

Best regards.

  @David-TP 

Thanks got the reply Dave.  I work from home so I had to uninstall it.   I will take another stab at it on the weekend  I am going to do a new install from scratch. 

I did a clean install with the x50 as the main. Working as it should now.   Love the DECO mesh setup.  This is the first problem I have had looking after 5 separate deco setups for family and friends.  I suspect it was something I had done or a setting I changed that  didn't transfer from the x60 to the x50 when I tried to swap the  main. @DNO-47 

Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:X50 main x60 satellites.
2025-08-04 04:05:50

  @DNO-47 

Hi, welcome to the community.

May I know your internet service provider?

Would the main Deco X50 turn red during the disconnection?

 

"Now, all traffic drops every 60 seconds.  Reconnects right away. "

-Did you check it in the web system log?

It is also highly appreciated if you can save a copy of the web UI system log and forward it to support.forum@tp-link.com

Subject:

 [Forum Escalation][ID 835914] Deco X50 Random Disconnection

 

Wait for your reply.

Best regards.

  0  
  0  
#2
Options
Re:X50 main x60 satellites.
2025-08-06 00:35:48

David-TP wrote

  @DNO-47 

Hi, welcome to the community.

May I know your internet service provider?

Would the main Deco X50 turn red during the disconnection?

 

"Now, all traffic drops every 60 seconds.  Reconnects right away. "

-Did you check it in the web system log?

It is also highly appreciated if you can save a copy of the web UI system log and forward it to support.forum@tp-link.com

Subject:

 [Forum Escalation][ID 835914] Deco X50 Random Disconnection

 

Wait for your reply.

Best regards.

  @David-TP 

Thanks got the reply Dave.  I work from home so I had to uninstall it.   I will take another stab at it on the weekend  I am going to do a new install from scratch. 

  1  
  1  
#3
Options
Re:X50 main x60 satellites. -Solution
2025-08-10 19:27:51 - last edited 2025-08-11 01:59:25

DNO-47 wrote

David-TP wrote

  @DNO-47 

Hi, welcome to the community.

May I know your internet service provider?

Would the main Deco X50 turn red during the disconnection?

 

"Now, all traffic drops every 60 seconds.  Reconnects right away. "

-Did you check it in the web system log?

It is also highly appreciated if you can save a copy of the web UI system log and forward it to support.forum@tp-link.com

Subject:

 [Forum Escalation][ID 835914] Deco X50 Random Disconnection

 

Wait for your reply.

Best regards.

  @David-TP 

Thanks got the reply Dave.  I work from home so I had to uninstall it.   I will take another stab at it on the weekend  I am going to do a new install from scratch. 

I did a clean install with the x50 as the main. Working as it should now.   Love the DECO mesh setup.  This is the first problem I have had looking after 5 separate deco setups for family and friends.  I suspect it was something I had done or a setting I changed that  didn't transfer from the x60 to the x50 when I tried to swap the  main. @DNO-47 

Recommended Solution
  1  
  1  
#4
Options