Configure lan with static IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Configure lan with static IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Configure lan with static IP address
Configure lan with static IP address
2015-11-05 21:27:43
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi, I have a TP-Link TD-W8961ND, I need to configure, in my lan, the static ip addresses of lan clients, then be able to do the port-forwarding.
In the configuration I find the ability to configure the IP client.
I think it is necessary to disable DHCP, but then where I set the static ip address?


Thank you
  0      
  0      
#1
Options
4 Reply
Re:Configure lan with static IP address
2015-11-06 18:12:48
Log in to your router with the web browser.
Then go to Interface Setup > LAN >>> http://www.tp-link.com/resources/simulator/TD-8951ND(UN)/rpSys.html
Here you can input the ip address for the router and disable DHCP.
Save and reboot router.

I hope the above will help you.
  0  
  0  
#2
Options
Configure lan with static IP address
2015-11-10 23:11:57
Hi Kneth, I saw the simulation configuration of the router, but not the same as mine, this is my screenshot
after disabling the DHCP, where I set my static IP? Moreover, except when the dhcp disabled,
It does not allow more than enable it.
File:
tp-link-dhcp-disabled.jpgDownload
  0  
  0  
#3
Options
Re:Configure lan with static IP address
2015-11-11 05:00:01
  0  
  0  
#4
Options
Re:Configure lan with static IP address
2015-11-11 16:11:44
Hi saprile, I hope the above post by jimasek has solved your problem.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 822

Replies: 4

Related Articles