GPON support on Archer GE-800
Hi!
Does Archer GE-800 v. 1.6 support GPON networks via a GPON ONU SFP module in its SFP+ port?
If not is firmware update coming with this support?
i thought the purpose of SFP+ ports was to plug fibre directly into the router and now it looks like I can only use GPON internet via ONU terminals.
Vadym
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello@VadK,
Welcome to our community.
If you want to use the SFP+ port on your router as the WAN port and replace the ISP provided ONT/ONU, it is generally necessary to use an SFP+ ONU Stick in conjunction with it.
However, SFP+ ONU Sticks are not widely applicable to all ISPs, the choice of SFP+ ONU Stick largely depends on whether it has been verified and approved by your ISP (Internet Service Provider). It is highly recommended to reach out to your ISP to acquire an officially verified, compatible SFP+ ONU Stick, as we can't guarantee compatibility, availability, or stability.
Click here to learn about Common Application Scenarios of SFP+ Interface.
Best Regards.
- Copy Link
- Report Inappropriate Content
Hello@VadK,
Welcome to our community.
If you want to use the SFP+ port on your router as the WAN port and replace the ISP provided ONT/ONU, it is generally necessary to use an SFP+ ONU Stick in conjunction with it.
However, SFP+ ONU Sticks are not widely applicable to all ISPs, the choice of SFP+ ONU Stick largely depends on whether it has been verified and approved by your ISP (Internet Service Provider). It is highly recommended to reach out to your ISP to acquire an officially verified, compatible SFP+ ONU Stick, as we can't guarantee compatibility, availability, or stability.
Click here to learn about Common Application Scenarios of SFP+ Interface.
Best Regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @Vinc86 ,
Welcome to our community.
May I know the model of your older router? Because the Archer GE800 is a wireless router, not a PON router.
It's likely that you won't be able to verify the PPPoE authentication step on GE800.
If it's just a standard PPPoE configuration, you can refer to How to setup TP-Link Wi-Fi Router on web management page
Best Regards.
- Copy Link
- Report Inappropriate Content
HI @Joseph-TP
The router was an older model from another brand.
At the moment, PPPoE authentication works correctly because the initial authentication is performed through a ZTE GPON ONT, which handles the first authentication step. However, this obviously reduces the available bandwidth, creating a bottleneck.
Unfortunately, this router is missing that initial authentication phase required by the ISP.
Since I believe this is a hardware limitation rather than a firmware issue, would it be possible to request that this authentication feature be added?
many thanks
- Copy Link
- Report Inappropriate Content
Hi @Vinc86 ,
Thanks for your feedback and suggestion.
For the feature request, you can report feedback here: Feature Request (Routers)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 458
Replies: 5
Voters 0
No one has voted for it yet.