Deco X50-5g using rj45 connectors as LAN ports
Hello. I'm struggling with the setup of X50-5G. I chose this product to replace the old xDSL connection because 5G has much faster speeds in my area. Therefore the device is operating in 4G/5G router mode. The 5G connection and the wireless clients are working perfectly but how can I connect wired clients? I tested all the rj45 connectors and looks like none of them is operating as a LAN interface. What am I missing?
@Ajar Hi, welcome to the community. It doesn't need extra configuration, and the Ethernet connection should be plug-and-play.
Have you checked on the laptop where the cable is not detected, or it is detected but no IP address?
-Have you configured a static IP on the laptop?
It is also suggested to go to Deco APP>More>Advanced>IPTV/VLAN, and disable this feature first.
Wait for your reply.
Best regards.
@Ajar Hi, welcome to the community. It doesn't need extra configuration, and the Ethernet connection should be plug-and-play.
Have you checked on the laptop where the cable is not detected, or it is detected but no IP address?
-Have you configured a static IP on the laptop?
It is also suggested to go to Deco APP>More>Advanced>IPTV/VLAN, and disable this feature first.
Wait for your reply.
Best regards.