@reffsZA These commands don't work in tp link I think. 

 

There's the Tp-link Xz000 G3 where you can set some of these settings via web UI, but it's a simpler device, with no wifi, but those specific commands don't work in any Tp Link anyway.

reffsZA wrote

I've updated to latest firmware, but can't run these commands:

 

flash set OMCI_FAKE_OK 1
flash set OMCI_OLT_MODE 1
flash set GPON_PLOAM_PASSWD 0123456789
flash set GPON_SN XXXXXXXXXXXXXX
flash set GPON_ONU_MODEL HG8010H
flash set PON_VENDOR_ID HWTC
flash set OMCI_SW_VER1 V3R015C10S106
flash set OMCI_SW_VER2 V3R015C10S106

flash set CUSTOM_OMCI_SW_VER1 V3R015C10S106

flash set CUSTOM_OMCI_SW_VER2 V3R015C10S106

flash set HW_HWVER 635.A

flash set ELAN_MAC_ADDR XXXXXXXXXXXX

 

I must run these commands for my ISP accept my device!

 

Please help.

 

  @reffsZA Have you found a solution for this problem?

Also interested Got one to replace ISP onu and router, but stuck without signal at the mo. Had to plug original isp devices again while I can't find a solution

  @reffsZA 

 

Hi.

 

Just got this router and Im having trouble getting it online.

 

Can any one explain what are these commands for?

I have this problem, there's no way to set right settings, and my provider dont accept my router.

 

This router dont have right fields to set OLT settings like hardware vendor, software version, etc etc whether by commands whether by WEB interface.

 

We need to set it someway. I buy mine in a store in Brazil.

I currently have a Huawei ONU model HG8010h, and I have all values I need, but web interface only allow I change GPON serial and GPON password. I need to send more fields.

 

See two examples of what I mean. This two pictures are from two other ONUs from other manufacturers. They allow settings more fields, so OLT will accept device like it was my Huawei HG8010h:

 

 

 

VSOL

 

 

 

 

 

ODI

 

 

I need help!

 

  @MacielJunior 

MacielJunior wrote

I have this problem, there's no way to set right settings, and my provider dont accept my router.

 

This router dont have right fields to set OLT settings like hardware vendor, software version, etc etc whether by commands whether by WEB interface.

 

We need to set it someway. I buy mine in a store in Brazil.

I currently have a Huawei ONU model HG8010h, and I have all values I need, but web interface only allow I change GPON serial and GPON password. I need to send more fields.

 

See two examples of what I mean. This two pictures are from two other ONUs from other manufacturers. They allow settings more fields, so OLT will accept device like it was my Huawei HG8010h:

 

 

 

VSOL

 

 

 

 

 

ODI

 

 

I need help!

 

 

This is exactly what I'm looking for! Have you found a way to access these screens in XX530v?

 

  @reffsZA Have you guys found something regard this?

 

Thanks!