Solution XX530v is capped at 50Mb download in a 500Mb plan
I installed this device in my house, put fiber directly on it, it registered without issues.
But I noticed a odd issue:
Any download is always capped at 50Mb/s (my plan is 500Mb/s for both downloads and uploads), but UPLOADS happen at full speed (500Mb/s).
I tried some troubleshooting but nothing seems to work!
If I return to the old ONU I was using, it downloads at full 500Mb/s (ONU in bridge mode and XX530v connecting via PPPoE).
As soon as I return the fiber cable to XX530v, the problem happens again.
I suspect it might have to do with firmware (I've updated it to latest firmware), but the problem is I can't find the original firmware that came with it (Firmware Version:0.4.0 3.0.0 v6096.0 Build 240426 Rel.38762n).
ISP told me this router is compatilble, and they advised me to contact TP LINK, which I'm doing, because it might be a software fault on device's side.
Local TP Link support couldn't help me. They just say the same old stuff like "this router is targeted to ISP, so ISP has to help you... etc etc etc".
It seems this is a secret device only ISPs have access.
I mean, come ou guys! This router is sold in many places, and we currently can buy it from stores and install it ourselves.
TP LINK has to support this device because it's sold to end users!
My network already directed me to contact Tp Link, so I demand a solution!
And my ISP is very open, you only need the right GPON SERIAL to connect. Pratically any device can be used in their network as long as the GPON SN is right.
I even tried another ONU (different from the original) and no problem with it as well.
There was even a similar topic in this forums with the EXACT SAME PROBLEM.
GPON XX530v V1 - Download speed limited to less than 50MB
Can anyone escalate it to engineers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Sonickbh wrote
@Kevin_Z Please provide us with the updated firmware for the xx230v version V1, including the fix so that the download is no longer limited to 50MB.
I've asked the development team whether there is any pre-release or beta firmware to fix this speed limit issue on the XX230v V1.
Will update you once I'm informed by the team.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Sonickbh wrote
The pre-release firmware has been updated in this reply. Please check:
https://community.tp-link.com/en/home/forum/topic/839982?replyId=1675476
- Copy Link
- Report Inappropriate Content
I had the same problem and my only fix was to disable mac clone. I asked my ISP release the MAC address and then connected the XX530v with mac clone disabled to get my router MAC address configured with the ISP.
In your case the ISP is saying they won't update the MAC. I believe this could be due to TR-069 (CPE WAN Management Protocol) not configured in your router. Tell them that your router supports ACS / TR-069 and they can configure ACS in your router.
TR-069 (CPE WAN Management Protocol) is not enabled in the XX530v by default. Follow the steps to enable TR-069.
- Go to http://192.168.1.1/superadmin and login
- Go to Advanced -> System Tools -> Administration
- In User Account Permission Settings enable CWMP Settings
Now CWMP Settings will show in Advanced -> System Tools -> CWMP Settings
Once this is done talk to them and convince them to change your router.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Do you have latest version firmware for XX530v_V2 EU?
- Copy Link
- Report Inappropriate Content
TomasChott wrote
@Kevin_Z Do you have latest version firmware for XX530v_V2 EU?
We've provided the latest 0.8.0 version in this link.
- Copy Link
- Report Inappropriate Content
so at now we have all XX530v V2 with this version of firmware
XX530vV2 v2.0 00000000
0.3.0 3.1.10 v6107.0 Build 250425 Rel.71973n
by release notes for version 0.5.0 / 251104 i must have minimum build 250520 or higher
Important Note:
-
The system has a security limitation that prevents firmware downgrade to versions prior to Build 250930.
-
Update Prerequisite: The device must be operating in Build 250520 or higher to apply this version.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Aman_1829
I, too, am facing this issue and not able to find any solutions. Please do let me know as well if you come across anything. Please DM me with other forums where you are following up on this issue.
Aman_1829 wrote
@xigga
I recently bought the tp link xx530v for my jiofiber connection to replace the jio fiber router with it by using it as a Gpon router. I applied all the settings which i could by seeing from youtube and all and my internet is working fine as i did the steps mentioned there of mac cloning.
I am facing an issue and have not been able to solve it even after getting the router replaced by the company.
during the use of wifi on the 5 ghz band (i have separated the bands into 2.4 ghz and 5 ghz), the internet suddenly stops working at random times for about 2 to 5 minutes. this happens to all devices connected to the 5 ghz band only.
this issue does not occur on the 2.4 ghz band or on ethernet-connected devices. It only happens on devices connected to the 5 ghz network. when I run the troubleshooter, it shows “no internet,” and when i check further, it says “no DHCP server found.”
after waiting for about 2 to 5 minutes, it starts working again on its own. during this time, the wifi sometimes disconnects and fails to reconnect, getting stuck on “connecting.”
this issue occurs around 4 to 5 times a day approx.
what could be the reason for this? i have also upgraded the firmware of my tp-link xx530v router, but the issue is still not resolved.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 17647
Replies: 127
Voters 0
No one has voted for it yet.