Home Network Community > Deco > Deco x50 outdoor with POE 160S injector
< Deco

Deco x50 outdoor with POE 160S injector

Deco x50 outdoor with POE 160S injector

Deco x50 outdoor with POE 160S injector
Deco x50 outdoor with POE 160S injector
Wednesday

Hi 

I am installing a deco outdoor in my current deco network

the x50 outdoor  picks the wifi from the main deco.

I have the Poe 160 injector to supply power and data to the x50.

from the x50 i want to extend wired to the next room with a LAN cable

I assume i can connect the network canle with the second port in the x50 , but i prefer to connect it from the P160 Poe. 
is that possible.?

I assume its not possible from the data in port. Do i need a 2 port ethernet switch from the data out port from the 160?

  1      
 
  1      
 
#1
Options
2 Reply
Re:Deco x50 outdoor with POE 160S injector
Thursday - last edited Thursday

  @MB508 

Hi, welcome to the community.

On the TL-POE160s, the data/POE power flow has direction:

Interface • 1× 10/100/1000Mbps RJ45 data-in port
• 1× 10/100/1000Mbps RJ45 power+data-out port
• 1 AC socket

So you're right, if 160S provides power for X50-outdoor now, it has no extra data-out port to provide internet for another wired device.

 

I notice you mentioned that Deco X50-outdoor connects to the WiFi of the main Deco. Is it far away from the main Deco? As you already use the power injector, it seems to be a waste not to connect the X50-outdoor via Ethernet Backhaul to the main Deco(by connecting the main Deco to the data-in port on the 160S).

 

"from the x50-ourdoor, i want to extend the wired connection to the next room with a LAN cable"

-What will be connected to the LAN cable in the next room?

Running the Ethernet cable directly from the extra port on X50-outdoor is still the best recommendation.

 

Thank you very much.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco x50 outdoor with POE 160S injector
Yesterday

  @MB508 

Hi,

 

thanks for your good response

ai need the outdoor x50: because the devices in my garden are too far from the main deco

the current ethernetcable is an outdoor type underground and leads to a second building 

i thinks the best option is indeedto connect this cable to the second port in the x50 outdoor.

i wanted to avoid this because now i need to bring these 2 cables through the wall by drilling.

 

  0  
  0  
#3
Options

Information

Helpful: 1

Views: 61

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.