Home Network Community > Deco > Last version of firmware for X3000 5G V1
< Deco

Last version of firmware for X3000 5G V1

Last version of firmware for X3000 5G V1

Last version of firmware for X3000 5G V1
Last version of firmware for X3000 5G V1
a week ago - last edited Monday
Model: Deco X50-5G  
Hardware Version: V1
Firmware Version: 1.1.3

Hello,

I just bought (Sept 2025) a second-hand X3000 5G V1, which is a variant of X50 5G.

Its current firmware is pretty old, 1.1.3 but on TP link download section you can't find X3000, only X50.

The last firmware of X50 5G V1 is 1.3.0, name of the file "X3000-5G_X50-5G_1.0_1.2_en_1.3.0 Build 20250724 Rel. 41491_whole_up" so it seems it could fit to my X3000 but I want to be sure ; )

Did someone here try the update for X3000 5G V1, is it OK with this firmware ?

Thanks a lot,

Raphaël

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Last version of firmware for X3000 5G V1-Solution
Monday - last edited Monday

  @Raph_X3000 

Hi, yes, you can also install the 1.3.0 firmware on Deco X3000-5G_v1:

https://www.tp-link.com/fr/support/download/deco-x3000-5g/v1/#Firmware

 

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  1  
  1  
#3
Options
3 Reply
Re:Last version of firmware for X3000 5G V1
a week ago
Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#2
Options
Re:Last version of firmware for X3000 5G V1-Solution
Monday - last edited Monday

  @Raph_X3000 

Hi, yes, you can also install the 1.3.0 firmware on Deco X3000-5G_v1:

https://www.tp-link.com/fr/support/download/deco-x3000-5g/v1/#Firmware

 

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  1  
  1  
#3
Options
Re:Last version of firmware for X3000 5G V1
Monday
Hello David, thanks a lot for your quick answer. I did the update, had to do 3 attempts but it finally worked. My router is now up to date and works fine. Thanks again, Raphaël
  1  
  1  
#4
Options

Information

Helpful: 1

Views: 78

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.