Bridge Mode for TD-W8961N

Bridge Mode for TD-W8961N
Bridge Mode for TD-W8961N
2015-11-29 10:26:38
Model : TD-W8961ND

Hardware Version : V3

Firmware Version : Version:3.0.0

ISP :

Dear All,

I'm facing issues with wireless bridge mode (WDS) between TD-W8961N and TD-W8961ND. I tried many times with the TP-Link given FAQ link below:
http://www.tp-link.es/faq-327.html
However, I am unable to get internet from my bridge router after setting. Can anyone tell me what do I miss anything? Thanks,

Here is the information of both routers:

- Main TD-W8961ND
Firmware Version:3.0.0
Build 120524 Rel.05221

- Bridge TD-W8961N
Firmware Version:2.0
Build 150630 Rel.34713
0
0
#1
Options
3 Reply
Re:Bridge Mode for TD-W8961N
2015-12-01 03:08:12
Have you received IP address from DHCP server after connected to WDS? You can check it in ipconfig /all
0
0
#2
Options
Re:Bridge Mode for TD-W8961N
2015-12-03 17:25:06
Thank Jimasek for your reply. Here is my symptom of my secondary router after configuration to bridge with main router:

1- My computer can connect to the main router through both wireless and LAN and it can access the internet normally.
2- When I connect to the secondary router through wireless, the connection is successful but my computer has no internet access. And if I connect to the secondary router through LAN, the connection is successful and my computer has internet access. So I think that my router already bridged with the main router because I can get internet access through the secondary router (but the connection is through LAN not wireless). Then the problem is that connection through wireless to my secondary, I can't internet access.

Thanks, Hope you have any idea about this.
0
0
#3
Options
Re:Bridge Mode for TD-W8961N
2020-04-15 18:25:26
Hey plm wifi code
0
0
#4
Options