Home Network Community > Deco > Deco P9 firmware 1.3.0 User feeback
< Deco

Deco P9 firmware 1.3.0 User feeback

Deco P9 firmware 1.3.0 User feeback

Deco P9 firmware 1.3.0 User feeback
Deco P9 firmware 1.3.0 User feeback
Sunday
Model: Deco P9  
Hardware Version: V2
Firmware Version: 1.3.0

Hello

 

I want to thank TP-Link devs for releasing Deco P9 1.3.0 firmware. 

 

After two weeks with 1.3.0 I can conclude that it is stable. PLC+Wi-FI mesh works very well and stable.

 

My notes for two weeks of usage 8x Deco P9 units in AP mode:

 

1. After the OTA update to 1.3.0 Deco APP became unusable, it showed all satellite Deco P9 units as offline but in fact network was up. Factory reseting all the units and re-adding it to a new network in the Deco APP fixed the issue.

2. With 1.3.0 Deco P9 now supports more than 6 units in one network. Currently I have stable network with 8 units.

3. PLC/Wi-Fi backhaul seems to be more stable compared to previous firmware.

 

 

What have to be done with Deco P9 firmware:

 

1.  Add SMART DHCP on\off switch in AP mode  - feature which was asked multiply times on this forum and which already present in various Deco models like Deco M4 but for some unknown reason is not present in the Deco P9 1.3.0 firmware.

2. Real-time speed rate is "--/--" in the Deco APP.   -   seems to be a bug, which is already fixed in Deco M4 1.8.0 https://community.tp-link.com/en/home/forum/topic/838518

3. Some fancy things from M4 1.7.0 firmware like preferred signal source and IoT network https://community.tp-link.com/en/home/forum/topic/793908

 

@David-TP  Can I kindly ask you to provide us information about possibility of adding these features in next firmware release for Deco P9?

  1      
 
  1      
 
#1
Options
5 Reply
Re:Deco P9 firmware 1.3.0 User feeback
Sunday

  @kld39 

 

While we wait for David can you submit your log file? You shouldn't of had to reset it to get everything to work right 

 

Could you please refer to this link to help me submit the Deco APP log:

How to submit Deco APP log

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#2
Options
Re:Deco P9 firmware 1.3.0 User feeback
Sunday
Ticket id with this issue (and app logs): TKID250918643
  0  
  0  
#3
Options
Re:Deco P9 firmware 1.3.0 User feeback
Sunday

  @kld39 

 

Ty for that. David should be at work in 4 to 5 hours not sure his exact start time. 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  1  
  1  
#4
Options
Re:Deco P9 firmware 1.3.0 User feeback
Monday

  @kld39 

Hi, thank you very much for your time and patience.

I'm afraid there hasn't been a shared firmware release plan for Deco P9, especially for the new features of the IoT network.

For Powerline Deco models, usually as long as the Powerline Backhaul is established, the signal source of all satellite units should be the main Deco.

 

Did you run into any issues with the "Smart DHCP" feature in AP mode?

(If yes, the engineer might help us request a beta firmware with the "Smart DHCP on/off" option.)

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:Deco P9 firmware 1.3.0 User feeback
Yesterday

  @David-TP 

 

>>Did you run into any issues with the "Smart DHCP" feature in AP mode?

 

If Deco P9 can't find DHCP server during the boot process it activates its own DHCP server. 

For example if Deco P9 and router start booting simultaneously after power outage, Deco P9 usually boots faster than router and activates its own DHCP server. This situation create a mess with Wi-fi clients, which must reconnect to get correct IP and Internet access.

I've discussed this with support in tickets TKID250918643 and TKID250918690 , but for some unknown reason TP-Link don't plan to add SMART DHCP on/off switch for 1.3.x firmware. Can it be reconsidered?

  0  
  0  
#6
Options

Information

Helpful: 1

Views: 155

Replies: 5

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.