VPN Client configuration on M8550

VPN Client configuration on M8550

VPN Client configuration on M8550
VPN Client configuration on M8550
Wednesday
Model: M8550  
Hardware Version: V1
Firmware Version: 1.0

Hi there,

I recently bought an M8550 to replace my defective GL.iNet Mudi. Mobile radio and Wi-Fi configuration worked out of the box.

 

But I need the router as a VPN client to connect to my AVM Fritz!Boxes. I configured a new WireGuard connection on each Fritz!Box, downloaded the config files, and uploaded them to the M8550. The result was an error: "invalid format". I figured out that something with the allowed IP addresses was not accepted. I had to remove the IPv6 addresses; afterwards, it worked.

 

However, I do not want to keep the VPN switched on all the time. It is pretty easy to switch it on and off in the web GUI.

 

I have three different VPN servers. Therefore, it would be great if there were a possibility to switch the VPN on and off, and also change VPNs, directly via the touchscreen. Unfortunately, I did not find any option for that.

 

Is there a way to switch VPNs via the touchscreen?

 

Thank you in advance.

 

Best regards,
Maxx2112

 

  1      
  1      
#1
Options
1 Reply
Re:VPN Client configuration on M8550
Thursday

  @Maxx2112 

Hi, thank you very much for the feedback.

Unfortunately, the Touch Screen currently does not support toggling the VPN connection on/off or switching between VPN servers. 

I'll forward this feature request to the senior engineers for further evaluation first.

Thanks a lot.

Best regards.

  0  
  0  
#2
Options