Home Network Community > Mobile Wi-Fi > Display password on screen M7350
< Mobile Wi-Fi

Display password on screen M7350

Display password on screen M7350

Display password on screen M7350
Display password on screen M7350
2 weeks ago - last edited 2 weeks ago
Tags: #Mobile Wi-Fi #Web GUI Management
Model: M7350  
Hardware Version: V9
Firmware Version: EU

Hi,

 

Why am I not seeing (wlan settings) option to turn off "Display password in screen" in this hw/sw revision?

 

Do I need to configure it somewhere else or it is completely missing and/or removed?

 

From what I was able to find it was available at some point in time and/or hw/sw revision(s).

 

It's v9 EU version.

 

With regards,

Anel

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Display password on screen M7350-Solution
2 weeks ago - last edited 2 weeks ago

  @Anel_ 

Hi, thank you very much for the update.

I'm afraid you are right, and the 9.0.3 Build 241219 9.0.3 Build 241219 version no longer has the option to turn off "Display password on the screen".

After checking with the senior engineer, it is planned to add it back in the future firmware release.

Best regards.

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:Display password on screen M7350
2 weeks ago

  @Anel_ 

Hi, thank you very much for the feedback.

You can enable the following settings on the web admin UI first:

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Display password on screen M7350
2 weeks ago - last edited 2 weeks ago

  @David-TP 

 

Thank you for the response.

 

I will leave possibility open that something else needs to be configured first but, as stated before:

 

There is no such option in the web UI of the V9, EU, 9.0.3. :)

 

So, what should I do to get it available? 

 

With regards,

Anel

  0  
  0  
#3
Options
Re:Display password on screen M7350-Solution
2 weeks ago - last edited 2 weeks ago

  @Anel_ 

Hi, thank you very much for the update.

I'm afraid you are right, and the 9.0.3 Build 241219 9.0.3 Build 241219 version no longer has the option to turn off "Display password on the screen".

After checking with the senior engineer, it is planned to add it back in the future firmware release.

Best regards.

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#4
Options
Re:Display password on screen M7350
2 weeks ago

  @David-TP 

 

Thank you for the quick response.

 

From the product perspective, I am curious what would be the rationale behind adding, removing and adding back such a logical

(or lets say required) feature?

 

With regards,

  0  
  0  
#5
Options

Information

Helpful: 1

Views: 308

Replies: 4

Tags

Mobile Wi-Fi Web GUI Management
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.