Home Network Community > Powerline Adapters > Mi TL-WPA4220 no da señal
< Powerline Adapters

Mi TL-WPA4220 no da señal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Mi TL-WPA4220 no da señal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Mi TL-WPA4220 no da señal
Mi TL-WPA4220 no da señal
2025-09-28 12:39:36 - last edited 2025-10-16 11:48:17
Model: TL-WPA4220  
Hardware Version: V5
Firmware Version:

Mi TL-WPA4220 ha dejado de dar señal wifi y muestra que no recibe señal a traves de la red eléctrica, pero si energia (se enciende la primera y la cuarta luz), a pesar de ponerlo en la misma habitacion del router y otras soluciones que he visto en la pagina ninguna arregla el problema. Lo he usado durante mas de un año y es el primer problema que tengo con el aparato.

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Mi TL-WPA4220 no da señal-Solution
2025-09-29 05:59:29 - last edited 2025-10-16 11:48:17

Hello @Miguelaap ,

Welcome to our community.

 

According to Google Translate, your question is that the TL-WPA4220 has no internet. If there is any discrepancy, please describe it in English.

Please hard reset the powerline adapter:

For TL-PA4010 (the models which start with TL-PAxxxx), press and hold the Pair button for 15s until all LEDs turn off and then come back on.

For TL-WPA4220 (models beginning with TL-WPAxxxx), press and hold the Reset button for 10s. Release the button and all LEDs turn off. When the LEDs turn back on, the reset process is complete.

 

Then try to pair them again: How to secure (pair) the Powerline Network.

Welcome to Community！ Check Out the Latest Posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Extend, and More △New Firmware Releases for Archer BE805/BE450 V1 to Support VPN Merge, New ECO Mode, and More △New Firmware for Archer BE400 V1 to Support IPv6 VPN, And More Click △Helpful Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Mi TL-WPA4220 no da señal-Solution
2025-09-29 05:59:29 - last edited 2025-10-16 11:48:17

Hello @Miguelaap ,

Welcome to our community.

 

According to Google Translate, your question is that the TL-WPA4220 has no internet. If there is any discrepancy, please describe it in English.

Please hard reset the powerline adapter:

For TL-PA4010 (the models which start with TL-PAxxxx), press and hold the Pair button for 15s until all LEDs turn off and then come back on.

For TL-WPA4220 (models beginning with TL-WPAxxxx), press and hold the Reset button for 10s. Release the button and all LEDs turn off. When the LEDs turn back on, the reset process is complete.

 

Then try to pair them again: How to secure (pair) the Powerline Network.

Welcome to Community！ Check Out the Latest Posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Extend, and More △New Firmware Releases for Archer BE805/BE450 V1 to Support VPN Merge, New ECO Mode, and More △New Firmware for Archer BE400 V1 to Support IPv6 VPN, And More Click △Helpful Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 1

Views: 162

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.