Solution RE700X/RE705X/RE715X Shows Offline in the EasyMesh Device List After Updating to New Firmware
This Article Applied to:
RE700X(EU/US)_V2
RE705X(EU/US)_V2
RE700X(EU)_V1
RE705X(EU)_V1
RE715X(EU)_V2
Phenomenon:
We've gradually added support for EasyMesh R2/R3 to some models, such as the RE700X and RE705X, which made several enhancements, including EasyMesh Ethernet Backhaul networking capabilities.
This has met the needs of many users for optimized EasyMesh networking. We believe many users have already experienced these features!
Recently, we received feedback from some users that after updating the firmware, their Range Extenders are displaying an unusual "offline" status under the EasyMesh Device section on the main router. Please note that this abnormal display does not actually affect network usage.
We have identified the cause of this unexpected behavior, and our R&D department has also provided beta firmware for some models.
Available Solution:
If this unusual display does not affect your network usage, you can wait for the official firmware update. The following beta firmwares are available for manual download to verify whether they resolve this unexpected behavior:
| Model | Direct Download Links |
| RE700X(EU)_V1 RE705X(EU)_V1 RE715X(EU)_V2 |
RE700X(EU)_V1/RE705X(EU)_V1/RE715X(EU)_V2_1.3.0 Build 20251017(Beta Firmware) |
| RE700X(EU)_V2 RE705X(EU)_V2 |
RE700X(EU)_V2/RE705X(EU)_V2_1.3.0 Build 20251017(Beta Firmware) |
| RE700X(US)_V2 RE705X(US)_V2 |
RE700X(US)_V2/RE705X(US)_V2_1.3.0 Build 20251021(Beta Firmware) |
| RE605X(Non US)_V3 | RE605X(Non US)_V3_1.3.17 Build 20260302(Beta Firmware) |
| RE600X(EU/AS/JP)_V3 | RE600X(EU/AS/JP)_V3_1.3.17 Build 20260302(Beta Firmware) |
| RE600X(US)_V4 | RE600X(US)_V4_1.3.17 Build 20260302(Beta Firmware) |
Note:
- Please be sure you have read the Beta Test Agreement before upgrading the beta firmware!
- For the sake of insurance, it's always recommended to save a copy of the range extender's Backup Config file before upgrading or downgrading.
- You may follow the guide to upgrade the firmware of your range extender. How to upgrade the firmware of my range extender.
If you have other models and experience the same abnormal display, please provide additional information, including but not limited to:
1. Complete network topology, including router and range extender models;
2. Ensure all devices are updated to the latest version and provide the firmware version here.
Thank you for your feedback and cooperation.
Update Logs:
Mar 6th, Added RE605X_V3, RE600X_V3/V4 Beta Firmware
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@JanWick ,
Awesome~! And also thank you for your continued efforts.
- Copy Link
- Report Inappropriate Content
Hey,
I've seen the post because I have the same problem on my RE705X but wasn't able to fix it even now with the beta software installed. At first the repeater connects normally to Easymesh if I use it in wireless mode but as soon as I plug in my ethernet cable and switch it to wired mode, it is shown as offline on my main router. Then after some days it disappears in my Easymesh network I guess because it was offline for too long. Another problem is that some devices are rather being connected to my other repeater in wireless mode which works fine but is further away than my RE705X. Maybe this is also because it is not properly connected via Easymesh. Even though the RE705X is not connected via Easymesh right now it works. Maybe I just forgot some simple setting. Hope you can help me fix it. If you need further information just ask.
Router: Archer BE550 v1 (EU)
Version: 1.2.1 Build 20250813 rel.27119
Repeater 1: RE550 v1 (EU)
Version: 1.1.0 Build 250829 Rel.42394n
Repeater 2: RE705X v1 (EU)
Version: Beta Version in this post
- Copy Link
- Report Inappropriate Content
Hello @Delta09 ,
Thanks for contacting our community.
Have you tried rebooting the entire network system?
For the Archer BE550-v1, the 1.2.2 has been released. Please check for updates on the Firmware Update page.
- Copy Link
- Report Inappropriate Content
Hey,
I tried reconnecting the RE705X after restarting the whole system but it didn't work. Also I can't find the update 1.2.2 you mentioned. Neither my tether app nor my web version of the BE550 v1 shows me an update. I also searched the download website and couldn't find it there. Is it a beta software in the community forum?
Thanks for helping
- Copy Link
- Report Inappropriate Content
Hi@Delta09,
Firmware synchronization order may vary depending on the region.
Please ensure you have successfully downloaded the beta firmware for the RE705X.
Also, will temporarily removing the RE550 allow the RE705X to display the online status correctly?
- Copy Link
- Report Inappropriate Content
Hey,
I tried it a few hours ago but it didn't work. Then I received the update you mentioned for the BE550 and suddenly it works fine. Thanks for your help
- Copy Link
- Report Inappropriate Content
@Delta09 ,
Great~ I am also glad that the new firmware can help~
- Copy Link
- Report Inappropriate Content
I installed the beta firmware in my RE700X V2.6 and it solved the "offline error". Everything seemed fine, so after several hours I moved it back to it's original location. The unit never came back online and is now suck in a constant reboot. I placed the unit next to the router again and it still won't connect. I have disabled the Easymesh feature on my AX55 and perfromed several hard resets on the RE700X. It's just stuck in the reboot mode. It never establishes _EXT signals. The single power LED flashes for several minutes then turns solid for about 10 seconds before all LEDs come on for about 3 seconds. Then a red signal LED flashes before all LEDs turn off and the whole process starts over again. Is this thing destine for the carboard box full of old network gear or is there a way to save it? I would love to go back to the older firmware if I could get is stable. Any suggestions would be appreciated.
- Copy Link
- Report Inappropriate Content
Will we get the final firmware version with bug fixes?
I still have 1.3.0 Build 20251017 Rel. 21385 for RE705X v1.0.
The online update offers firmware 1.3.10 Build 20250817 Rel. 63070.
Should I stay on the beta version, or can I update to 1.3.10 Build 20250817 Rel. 63070?
Does it fix all the EasyMesh bugs? Or is it older than the beta?
- Copy Link
- Report Inappropriate Content
Hello @STN ,
As far as I know, this official firmware version should have already fixed this display anomaly, so we recommend updating to the latest firmware.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8917
Replies: 31
Voters 0
No one has voted for it yet.