TPlink Archer C80 V1 5G not working properly anymore

TPlink Archer C80 V1 5G not working properly anymore

TPlink Archer C80 V1 5G not working properly anymore
TPlink Archer C80 V1 5G not working properly anymore
2 weeks ago - last edited 7 hours ago
Tags: #Network Connectivity #Archer C80
Model: Archer C80  
Hardware Version: V1
Firmware Version: 1.13.2 Build 230824 Rel.74702n(5553)

Hi to All,

 

 

Our TPlink Archer C80 hardware versionV1.60 

Wireless 5G not working properly anymore, its active but when you trying to connect, its keep saying "can't connect to this network"

or sometimes it can connect but the output speed is below average like 50mbps below and upload of 10mbps out of 100 mbps connection. 

 

We try already to hard reset many times and rest on wui, still the same issue. 

 

Please help. :(

 

Thanks to all

russel

  0      
  0      
#1
Options
1 Accepted Solution
Re:TPlink Archer C80 V1 5G not working properly anymore-Solution
a week ago - last edited 7 hours ago

Hello @RuseLL ,

Welcome to our community.

 

Could you change the wireless settings to 5GHz? And enable the 5GHz guest network for comparison. If neither of the 5GHz networks works, please try a hard reset on the router.

For slow speed of 5GHz, please try different channels and channel widths. 

 

If suggestions above don't help, please consider contacting local support for further help.

 

 

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:TPlink Archer C80 V1 5G not working properly anymore-Solution
a week ago - last edited 7 hours ago

Hello @RuseLL ,

Welcome to our community.

 

Could you change the wireless settings to 5GHz? And enable the 5GHz guest network for comparison. If neither of the 5GHz networks works, please try a hard reset on the router.

For slow speed of 5GHz, please try different channels and channel widths. 

 

If suggestions above don't help, please consider contacting local support for further help.

 

 

 

Recommended Solution
  0  
  0  
#2
Options