Lan DNS for WireGuard users

Lan DNS for WireGuard users

Lan DNS for WireGuard users
Lan DNS for WireGuard users
a week ago - last edited 11 hours ago
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.3.1 Build 20251015 Rel.78291

Hello,

 

Now that we have local DNS service on the ER605 router (great!), I found that the Lan DNS does not work for WireGuard peers (remote clients).

I tested with an Android for which Private DNS has been switched off for the WireGuard VPN network. I also verified that I can access servers in my LAN by ip-address.

Am I missing a setting, or should this be considered a bug?

 

Regards, Ronald

  0      
  0      
#1
Options
1 Accepted Solution
Re:Lan DNS for WireGuard users-Solution
11 hours ago - last edited 11 hours ago

  @Ronald_Ruijs 

When configuring LAN DNS, the subnet must be set to the WireGuard VPN’s virtual network or to “All.” 

Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Lan DNS for WireGuard users
a week ago - last edited a week ago

  @Ronald_Ruijs 

 

there should be no problem with local dns, here is an example that I use and which must be entered into the wireguard client

 

DNS = 10.13.65.82, 10.13.65.69, mylan,intra

 

here I use 2 dns servers and a dns suffix

 

  0  
  0  
#2
Options
Re:Lan DNS for WireGuard users
Tuesday

Hello,

Tried again, Wireguard subnet 10.0.0.x, Router subnet 192.168.1.x, no luck.

DNS Entries created with router's Lan DNS are not being resolved.

Anyone else observed this. too?

Regards,

Ronald

  0  
  0  
#3
Options
Re:Lan DNS for WireGuard users-Solution
11 hours ago - last edited 11 hours ago

  @Ronald_Ruijs 

When configuring LAN DNS, the subnet must be set to the WireGuard VPN’s virtual network or to “All.” 

Recommended Solution
  0  
  0  
#4
Options