RE600X, RE605X appear offline
My Wifi-extenders RE605X and RE600X appear offline on both the router configuration page and Tether app. That does not change despite reboot of the router.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @wohltemperiert ,
Welcome to our community.
May I know the hardware and firmware versions of your router and extenders? How to find the hardware and firmware version of my TP-Link device
Have you created an EasyMesh Network among the router and extenders? Even the status is offline, the clients still can be connected to the range extenders, right?
I assume you recently updated the firmware for your router or extenders? This anomaly is most likely caused by the EasyMesh component of your router and extenders being out of sync.
If this doesn't affect your network usage, please keep your current settings. Meanwhile, I will report this situation to the relevant departments for further analysis.
Thank you.
- Copy Link
- Report Inappropriate Content
Hello @wohltemperiert ,
Welcome to our community.
May I know the hardware and firmware versions of your router and extenders? How to find the hardware and firmware version of my TP-Link device
Have you created an EasyMesh Network among the router and extenders? Even the status is offline, the clients still can be connected to the range extenders, right?
I assume you recently updated the firmware for your router or extenders? This anomaly is most likely caused by the EasyMesh component of your router and extenders being out of sync.
If this doesn't affect your network usage, please keep your current settings. Meanwhile, I will report this situation to the relevant departments for further analysis.
Thank you.
- Copy Link
- Report Inappropriate Content
@Joseph-TP Yes, I created easy mesh and I updated the firmware to the latest. I had read about similar issue with RE705X and thought it would not affect RE600X and 605X. Apparently it is the case.
- Copy Link
- Report Inappropriate Content
Please tell me the specific hardware and firmware versions of your router and extenders, you can refer to How to find the hardware and firmware version of my TP-Link device
- Copy Link
- Report Inappropriate Content
Hello. I have the same issue. I set up the mesh system but re600x extender appears offline. My ax21 works perfectly with re220 in mesh mode, but now that I have upgraded to re600, it appears offline.
AX21
1.2.1 build 20240809 rel.75559
RE600X
1.2.10 build 20250627 rel. 66328
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I too have the same issues. using the web browser to access the router/advance/easymesh, I see 4 devices (AX72, RE500x, RE700x and WPA8631, they 3 satellite devices shows offline. It is the same if I use the Tether app.
On those devices there are clients connections, and activity in progress. So the reporting of the offline apparently is not impacting the use of the devices.
Is the issue with the router?
As both the Tether app and the web browsers report the same status.
RE700X Firmware Build 1.3.15 20251124 Rel.43984
Hardware Version RE700X v1.0
RE500X Firmware Build 1.2.0 Build 20250815 Rel. v2.0
Hardware Version RE500X v2.0
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 331
Replies: 6
Voters 0
No one has voted for it yet.