Business Community > Gateways > OpenVPN (CLient to Server) with local DNS
< Gateways

OpenVPN (CLient to Server) with local DNS

OpenVPN (CLient to Server) with local DNS

OpenVPN (CLient to Server) with local DNS
OpenVPN (CLient to Server) with local DNS
Yesterday - last edited 10 hours ago
Tags: #OpenVPN #NAT #VPN #DNS
Model: ER605 (TL-R605)  
Hardware Version:
Firmware Version:

Hello, I'm reaching out in hope for som guidance for a newbie in VPN tunneling.

I've made a VPN (Server-to Client), which i can connect to from my laptop.

From there I can ping my ER605. So fa so good.

 

But I do not get any access to exit the internet when running with my VPN connection.

 

I would like to do a setup, so I on my computer, can access local streaming TV with the local DNS from my ER605.

Can any help me with a remedy, so I can watch local TV, when travelling?

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:OpenVPN (CLient to Server) with local DNS-Solution
11 hours ago - last edited 10 hours ago

  @NeilR_M I found the mistake. My ER605 is behind a firewall. After correcting the IP in my client to the public IP, I succeded.

However thank you for guidance.

 

Recommended Solution
  1  
  1  
#6
Options
6 Reply
Re:OpenVPN (CLient to Server) with local DNS
Yesterday

  @Gronskov When setting up your OpenVPN server, what did you set for the Primary DNS server? Also, did you enable Full Mode? If you can provide your OpenVPN server configuration as well that would be great. 

  0  
  0  
#2
Options
Re:OpenVPN (CLient to Server) with local DNS
16 hours ago

Hello  @NeilR_M , thank you for quick response.

I did not put any DNS, nor full mode in my setup.

I've made som screenshots at my VPN config on my Router and the VPN Client.
So I should use a DNS from my IP provider, and change it into Fullmode?

 

'

 

 

  0  
  0  
#3
Options
Re:OpenVPN (CLient to Server) with local DNS
16 hours ago
Or is it better to use Wireguard to setup a VPN?
  0  
  0  
#4
Options
Re:OpenVPN (CLient to Server) with local DNS
16 hours ago

  @Gronskov Try just with enabling Full Mode first, and then if it does not work still, go ahead and add a manual DNS entry.

  0  
  0  
#5
Options
Re:OpenVPN (CLient to Server) with local DNS-Solution
11 hours ago - last edited 10 hours ago

  @NeilR_M I found the mistake. My ER605 is behind a firewall. After correcting the IP in my client to the public IP, I succeded.

However thank you for guidance.

 

Recommended Solution
  1  
  1  
#6
Options
Re:OpenVPN (CLient to Server) with local DNS
9 hours ago

  @Gronskov Great to hear your issue got solved! Please don't hesitate to post again if you have any further issues.

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 82

Replies: 6

Tags

OpenVPN NAT VPN DNS
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.