realtime traffic monitoring issue with archer ax53

realtime traffic monitoring issue with archer ax53

realtime traffic monitoring issue with archer ax53
realtime traffic monitoring issue with archer ax53
2025-12-22 05:24:58 - last edited 2026-01-14 08:04:11
Model: Archer AX53  
Hardware Version: V1
Firmware Version: 1.4.4

realtime speed was not showing correctly on my archer ax53,i tried to watch it from tplink tether but same result, i rebooted it then its showing correctly,but after a few moment,it happens again, what is the causes?

  0      
  0      
#1
Options
1 Accepted Solution
Re:realtime traffic monitoring issue with archer ax53-Solution
2025-12-30 06:20:57 - last edited 2026-01-14 08:04:11

Hello @Shourove_Sharma ,

Welcome to our community.


Here are some steps you can follow to troubleshoot:
1. Wait a few seconds: Sometimes, the real-time rate display in the Tether app may be delayed. Please wait for a short while to see if the rate updates correctly.
2. Check your network topology: The real-time rate may not be accurate if you are mainly using LAN (wired) communication within your network, such as when a NAS device is downloading files or streaming videos inside your local network. The Tether app's real-time rate is designed to show Internet traffic, so internal LAN traffic may not be reflected accurately.
3. Reinstall the Tether app: Try uninstalling and reinstalling the Tether app on your phone to ensure you have the latest version and to clear any potential app glitches.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:realtime traffic monitoring issue with archer ax53-Solution
2025-12-30 06:20:57 - last edited 2026-01-14 08:04:11

Hello @Shourove_Sharma ,

Welcome to our community.


Here are some steps you can follow to troubleshoot:
1. Wait a few seconds: Sometimes, the real-time rate display in the Tether app may be delayed. Please wait for a short while to see if the rate updates correctly.
2. Check your network topology: The real-time rate may not be accurate if you are mainly using LAN (wired) communication within your network, such as when a NAS device is downloading files or streaming videos inside your local network. The Tether app's real-time rate is designed to show Internet traffic, so internal LAN traffic may not be reflected accurately.
3. Reinstall the Tether app: Try uninstalling and reinstalling the Tether app on your phone to ensure you have the latest version and to clear any potential app glitches.

Recommended Solution
  0  
  0  
#2
Options