Is there a way to enable/disable the LEDs on the Archer VR400 v3 ?
I've just acquired a new VR400 v3, and updated the firmware to the current latest: -
However, I don't appear to have a way to enable/disable the five green LEDs on the front of the unit, either via a physical button or through the web or telnet interfaces
Other Archer models offer either/both option; looks like this isn't available on the VR400 ?
Cheers, and Merry Christmas, Dave
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @david_hay ,
Welcome to our community.
LED control functionality is typically found on wireless routers and range extenders.
For DSL modem routers, if you have ensured the firmware is up-to-date but still do not see this function, it means that this feature is not currently supported.
You can go to the Feature Request Board to give feedback on your needs.
Best Regards.
- Copy Link
- Report Inappropriate Content
Hello @david_hay ,
Welcome to our community.
LED control functionality is typically found on wireless routers and range extenders.
For DSL modem routers, if you have ensured the firmware is up-to-date but still do not see this function, it means that this feature is not currently supported.
You can go to the Feature Request Board to give feedback on your needs.
Best Regards.
- Copy Link
- Report Inappropriate Content
@Joseph-TP thanks, have raised a FR: -
https://community.tp-link.com/en/home/forum/topic/852958?page=1
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 207
Replies: 2
Voters 0
No one has voted for it yet.