Hi  @jm_carmona,

there is a work around which i use for a similar scenario, (not ideal as it requires an additional tapo device), but it works. I have an S200B button (which is also not compatible with Google), which powers on third party downlights, which are Google controlled.

To make your scenario work do the following:

• First of all you need to purchase a P100 plug which will only be used for this automation. Plug it in a place which is out of the way and can't be removed or turned on/off. It will be used as a bridge between Tapo and Google for the automation.
• When the S112 is turned on/off, then use Tapo automation to also turn the P100 plug on/off, so it mirrors the switch.
• Then use Google or Alexa automation (as they do work with P100's) to turn on/off your non-tapo devices via the automations in that platform based on the P100 switching on/off.

Unfortunately you need to purchase additional hardware (P100's) for each switch, (I have a powerboard full of them in my house for this purpose).

Hope this makes sense and let me know if you need any assistance with the above.