Hello @SebasLag ,

Welcome to our community.

May I know if your network topology diagram is as follows:

ISP modem—BE700)))((( client devices

(Note: — stands for wired connection,)))((( stands for wireless connection )

Have you created an EasyMesh Network?

Which wireless clients are most likely to lose network connectivity? Have you compared with the wired clients?

If the instability only occurs on wireless clients, please try the following suggestions:

    1) Make sure the Router is properly placed; it should be put in an open area instead of inside a cabinet or shelf.
    2) Change the wireless channel to another one. You may refer to Changing Channel and Channel Width on a TP-Link Router (new logo).
    3) Change channel width to avoid interference. For 2.4GHz wireless client devices, adjust the 2.4GHz channel width to 20MHz; for 5 GHz wireless client devices, adjust the 5GHz channel width to 80MHz or 40MHz, etc.

Hi  @SebasLag ,

Thanks for contacting us again.

It seems the engineers need more time to follow up on your case. You are welcome to come back anytime to share the latest progress or the final solution.