Home Network Community > Deco > BE65pro green light but not giving out internet
< Deco

BE65pro green light but not giving out internet

BE65pro green light but not giving out internet

BE65pro green light but not giving out internet
BE65pro green light but not giving out internet
Saturday - last edited 7 hours ago
Model: Deco BE65 Pro  
Hardware Version: V1
Firmware Version: 1.2.0 Build 20250718 Rel. 49740

My Deco BE65 Pro does not give out internet. All my devices connects to it but no internet. In the application I can do speed test and is able to connect to internet.

 

All the clients can't connect. The status is green light.

 

I already reset to factory settings and configured it as new network, still having issue.

 

I tried changing DNS to manual 8.8.8.8/8.8.4.4 still no luck.

 

Any solution to this? this is really annoying.

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:BE65pro green light but not giving out internet-Solution
Saturday - last edited 7 hours ago

I reset to factory settings again, but this time I replaced the main router with the slave router, and it worked. I then wired backhauled the old main router, and it's now working.

Can you explain why this happened? Right now, it's working properly. It seems like my old main router had an issue

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:BE65pro green light but not giving out internet-Solution
Saturday - last edited 7 hours ago

I reset to factory settings again, but this time I replaced the main router with the slave router, and it worked. I then wired backhauled the old main router, and it's now working.

Can you explain why this happened? Right now, it's working properly. It seems like my old main router had an issue

Recommended Solution
  0  
  0  
#2
Options
Re:BE65pro green light but not giving out internet
7 hours ago

  @Kukwang 

Hi, welcome to the community.

It's still too early to say something wrong with the previous main Deco. Personally, I think the ISP might take some time to authorize the device.

It is recommended to monitor the network behavior for a while.

Moreover, it is also suggested to install the latest 1.2.10 firmware here:Deco BE65/BE65 Pro_1.2.10 New Firmware with Enhanced Stability & Interference Resistance

 

Later, when you're available, you can refer to this link to switch the old unit back as the main Deco to see what happened:

How to replace the main Deco with another Deco

 

Thank you very much.

Best regards.

 

 

 

 

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.2.10 New Firmware with Enhanced Stability & Interference Resistance ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 45

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.