BE85 6ghz speed issue
I seem to be having a weird speed issue no matter which node I connect to. I am currently connected to the 6ghz band and the signal is -47dbm. I have a open speedtest server setup and it has a 10gb network card. When i run the test on 6ghz it wont go above 865mbps. If i disable 6ghz and connect to 5ghz the signal is -58dbm. When i then run the same internal speed test I get speeds between 1700 and 2100 mbps standing in the same spot. I have tested this with a iPhone 17 pro, Google Pixel 10 pro and a laptop that has wifi 7 and can connect at 320mhz. I find it extremly weird that the 6ghz has a better signal but gives half the speed.
Hi, thank you very much for the feedback.
Is this locally-hosted speed server connected to one of the Deco BE85s(main Deco or satellite Deco?) via an Ethernet cable?
It is recommended to send an email to forumsupport.usa@tp-link.com with the following details:
(Please add the forum ID#855406 in the subject.)
- Some screenshots of the network map on the Deco, such as the attached picture
- Some screenshots of the speedtest results on the mobile devices
Best regards.
I am going to add everything here also just incase someone else has the issue. I didn't get a chance to do the local speedtest before i left for work but the numbers in the attachment are always almost identical to the local speedtest. And yes the local speedtest server is connected to to the main Deco. It doesn't matter which deco im connected to the numbers are the same. See attachments.
