Ax23 no easymesh menu

Nick2553

16 hours ago - last edited 16 hours ago

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2026-02-09

Ax23 no easymesh menu

16 hours ago - last edited 16 hours ago

Tags: #EasyMesh

Model: Archer AX23

Hardware Version: V1

Firmware Version: 1.1.3

My ax23 V1 appears in the easymesh compatibility list. And in a wired backhaul compatibility list appears with firmware versions older than mine. But There is no easymesh menu like on my ax55. According to the instructions on my ax55 I should enable easymesh on the satellite(ax23) and add it in the menu. Is there another way to enable easymesh/add it as a satellite?

1 Accepted Solution

woozle

LV6

16 hours ago - last edited 16 hours ago

Posts: 4184

Helpful: 2907

Solutions: 943

Stories: 0

Registered: 2020-05-01

Re:Ax23 no easymesh menu-Solution

16 hours ago - last edited 16 hours ago

@Nick2553

Hi,

The easiest way to add the Archer AX23 as a wired EasyMesh Satellite is to reset the AX23 to factory default settings (either via the web interface or Tether app or by pressing and holding the small "Reset" button on the router) and then connecting it to the Archer AX55 by Ethernet cable (AX55 LAN port -> AX23 LAN port). You will need some patience, because the AX23 will reboot automatically after it has been added as a Satellite, so the whole process takes a few minutes.

As for the missing EasyMesh menu. On the Archer AX23 the EasyMesh is only available in Router mode, but not in Access Point mode.

Ax23 no easymesh menu

Ax23 no easymesh menu

Information

Voters 0

Tags