I hab a system where I had the modem this was connected to the a switch from a switch i ran a cable to a m9 deco as main and all the other decos 2 m9 and x50 where connected via WiFi to each other. worked fineert everything in the switch was connected to the basically an other ip address. so I changed the setup. I put the x50 between the modem and the switch made it my main deco. so now I have modem-> x50 outdoor -> switch from the switch I still have cable to one of the m9 and the Other 2 are connected via WiFi.

in the old system I had homey already connected to the WiFi of the decos and I had connected all the homewizard sockets and p1 to homey via homewizard app. on there system it only finds 1 socket the other 2 it doesn’t find after changing the security from wpa2 to wpa/wpa2 I can find the 3 sockets but still can’t find the p1 meter

keep getting EHOSTUNREACH error. they are telling me it is due to the deco settings but don’t know what to change.