BE805 new firmware 1.3.3 Build 20251222 rel.48968
My BE805 just received a new firmware update 1.3.3 Build 20251222 rel.48968
** I just updated to this new firmware and will now monitor if it is stable **
Wonder if anyone has updated to this new firmware and if it is stable as my BE805 is quite stable now and it doesn't seem useful to me. Hopefully we BE805 users can get a more feature packed firmware after this.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi. So far everything seems to be fine so far. Been only a few days since I last updated it.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Mlo is still buggy.. Sometime no internet.. Need reconnect back..
- Copy Link
- Report Inappropriate Content
Yeap. So far everything is working as per normal as I don't really use any of the " advance " features like the built-in VPN and the USB file sharing feature.
- Copy Link
- Report Inappropriate Content
I rarely use MLO as well.
Well I tried . . . but sometimes my phone would disconnect the network after couple of hours.
I find MLO technology a bit too young if that makes sense, might have to wait until we can extend MLO to other nodes to make it more stable or WiFi 8 or even 9 to improve on MLO.
- Copy Link
- Report Inappropriate Content
@Joseph-TP u inside the thread also.. Able to tune and increase 6ghz bandwidth strength higher? Thx
https://community.tp-link.com/us/home/forum/topic/855956
- Copy Link
- Report Inappropriate Content
Hello@Toperr ,
Thanks for getting back to us.
May I know if your network topology diagram is as follows:
ISP modem—BE805)))((( client devices
(Note: — stands for wired connection,)))((( stands for wireless connection )
Besides the MLO network connectivity, how is the connectivity of other wireless bands? Please disable the MLO network for comparison.
Was the network connection stable before updating to 1.3.3?
What is the channel width at 6 GHz now? What is your reason for wanting to increase the channel width?
- Copy Link
- Report Inappropriate Content
Yes.. Mine connection is modem to(wired) BE805 (wired/ wireless) to clients.. I only using 1 x be805 and is sufficient to cover my apartment. However 1 room is abit weak for 6ghz. I hope the next firmware u can increase the power for 6ghz.
Besides the MLO network connectivity, how is the connectivity of other wireless bands? Please disable the MLO network for comparison.
"Was the network connection stable before updating to 1.3.3?"
Nope.. On 1.3.2 or 1.3.1 mine phone got missing 6ghz ssid.. Thus with the help of one of yr developer I reverted back to 1.2.2 firmware which is the most stable for me.. Now I trying 1.3.3 is stable enough except MLO.
" What is the channel width at 6 GHz now?"
I am using channel 5 the lowest.. I tried and the lowest channel give me the furthest range.
"What is your reason for wanting to increase the channel width?"
I am asking to increase the power for 6ghz ssid for next firmware only. So that I can purely use 6ghz only(without 5ghz ssid) and can make full use of the speed.. As when I am at the furthest room and when I enable both 5ghz & 6ghz ssid, My phone might switch to 5ghz ssid but when I walk back near to router my phone didn't switch back to 6ghz ssid.. That the issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 374
Replies: 10
Voters 0
No one has voted for it yet.