Home Network Community > DSL Modem Routers > VX800V - If I enable WPS the Router freezes and reboots
< DSL Modem Routers

VX800V - If I enable WPS the Router freezes and reboots

VX800V - If I enable WPS the Router freezes and reboots

VX800V - If I enable WPS the Router freezes and reboots
VX800V - If I enable WPS the Router freezes and reboots
Wednesday
Model: VX800v  
Hardware Version: V1
Firmware Version: 800.0.18

VX800V - If I enable WPS-Slider the Router freezes and reboots.

After the reboot the WPS Button is still disabled.

So there is no possibility to join the easymesh network with a new bought repeater over the WPS Button.

I have an additional RE700X Repeater that is already a member of the easymesh network.

If I push the WPS Button in the GUI there, the device reboots as well with the following logs:

 

Hardware Version: RE700X v2.0
Software Version: 1.3.10 Build 20250817 Rel. 54331

 

2026-03-11 19:42:39 wps:2.4G WPS failed.
2026-03-11 19:42:39 wps:2.4G WPS timed out. Failed to receive WPS message from the RootAP.
2026-03-11 19:42:39 wps:5G WPS failed.
2026-03-11 19:42:39 wps:5G WPS timed out. Failed to receive WPS message from the RootAP.
2026-03-11 19:42:39 wps:5G WPS failed.
2026-03-11 19:42:39 wps:5G WPS timed out. Failed to receive WPS message from the RootAP.
2026-03-11 19:42:39 wps:2.4G WPS failed.
2026-03-11 19:42:39 wps:2.4G WPS timed out. Failed to receive WPS message from the RootAP.
2026-03-11 19:42:39 wps:5G WPS failed.
2026-03-11 19:42:39 wps:5G WPS timed out. Failed to receive WPS message from the RootAP.

 

Please fix this.

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:VX800V - If I enable WPS the Router freezes and reboots
Yesterday

Hello @_Ch-ris_ ,

Welcome to our community.

 

Have you changed settings on the modem recently? Like a firmware update.

Was the first RE700X added before the settings were changed?

 

For the new RE700X, please take a hard reset and add it via 5G or Web interface.

 

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE400 V1 to Support IPv6 VPN, Wake On LAN, and More △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#2
Options
Re:VX800V - If I enable WPS the Router freezes and reboots
18 hours ago

  @Joseph-TP Hi Joseph, I updated the vx800v to the latest Version. The RE700x is a easymesh member for a Longer Time. Maybe for one year. Normally I enable WPS only, if I need IT. I bought another RE700x and all I want to do is joining the easymesh Network. But I cant do this, because of the Situation i discribed. If I enable it on the Web-Gui, the Router stops responding and reboots. Then after the reboot WPS is still disabled. This is the only Bug I have.  Apart from that the easymesh Network runs smooth, fast and stable.

Greetz Chris 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 54

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.