WR902AC connectivity problem

WR902AC connectivity problem

WR902AC connectivity problem
WR902AC connectivity problem
2026-03-22 10:45:51 - last edited a week ago
Model: TL-WR902AC  
Hardware Version: V3
Firmware Version: N/K

I am trying to set up this mobile wi fi router in Client mode.  I have tried multiple times / configurations without success.  I successfully complete the set up and connect to my home wi fi network but when I then connect a laptop by Ethernet cable there is no internet connection.  I have tried both Smart IP and Static IP, setting the IP to 192.168.1.250 and disabling DHCP.  No luck with any combination.

 I have tried powering off the WR902AC after making changes and ditto the laptop.  I have Reset and gone through the set up again.  No joy.

BTW the Firewall of my laptop is Off.

 

Can anyone please suggest a possible fix? 

0
0
#1
1 Accepted Solution
Re:WR902AC connectivity problem-Solution
2026-04-01 22:24:08 - last edited a week ago

Dichotome wrote

 I successfully complete the set up and connect to my home wi fi network but ...

  @Dichotome 

 

Hi,

 

Have you verified the WR902AC has indeed connected to your home network? Does the WR902AC show up in the client list or DHCP list of your home Wi-Fi router? (for example, like in the screenshot below)

 

Recommended Solution
1
1
#3
2 Reply
Re:WR902AC connectivity problem
2026-04-01 11:36:38

Hello  @Dichotome ,

Welcome to our community.

 

Please select the correct mode that meets your needs: How to select the operating mode of TP-Link wireless multiple modes devices

 

If you need to set up client mode, please refer to TL-WR902AC_V3_User Guide( from page 131)

Welcome to Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click Or ☆Recommended Solution if the post/answer helps.
0
0
#2
Re:WR902AC connectivity problem-Solution
2026-04-01 22:24:08 - last edited a week ago

Dichotome wrote

 I successfully complete the set up and connect to my home wi fi network but ...

  @Dichotome 

 

Hi,

 

Have you verified the WR902AC has indeed connected to your home network? Does the WR902AC show up in the client list or DHCP list of your home Wi-Fi router? (for example, like in the screenshot below)

 

Recommended Solution
1
1
#3