Home Network CommunityDSL Modem Routersdisabled wireless keeps coming back on
DSL Modem Routers

disabled wireless keeps coming back on

disabled wireless keeps coming back on

disabled wireless keeps coming back on
disabled wireless keeps coming back on
2026-03-25 13:47:12 - last edited 2 weeks ago
Model: VX800v  
Hardware Version: V1
Firmware Version: 0.11.0 3.0.0 v603c.0 Build 250702 Rel.50756n

I want to turn off 2.4 GHz wireless and do so via the web interface. No problem.

An hour later, I look and the 2.4 GHz wireless has been enabled again. This occurs repeatedly.

I have turned off band steering and onemesh. I do have a wireless schedule (goes off at midnight).

Is this another bug in the vx800v ? The 2.4 GHz won't stay off ?

0
0
#1
1 Accepted Solution
Re:disabled wireless keeps coming back on-Solution
2026-03-27 06:16:43 - last edited 2 weeks ago

Hello @mimble ,

Please ensure your firmware is updated to the latest version: VX800v(DE)_V1_0.18.0 Build 260203.

As far as I know, it will be fixed in the next firmware release. Please keep an eye out for future firmware releases.

Thank you for your patience and cooperation.

Welcome to Community！ Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
0
0
#4
3 Reply
Re:disabled wireless keeps coming back on
2026-03-26 05:58:01

Hello @mimble ,

Welcome to our community.

 

You mentioned the 2.4G band being automatically enabled. Does this happen after the wireless schedule takes effect? Does it occur at a fixed time?

Additionally, if the modem has been rebooted, it may revert to a state where all WiFi bands are enabled.

However, since the VX800v is an ISP-customized device, you may need to contact Local Support for further assistance regarding more design details.

Welcome to Community！ Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
0
0
#2
Re:disabled wireless keeps coming back on
2026-03-26 14:14:20

  @Joseph-TP The schedule should turn off all wifi for a few hours after midnight. It does nothing during the day / evening.
The 2.4 GHz is being enabled regardless of the time of day. It does not happen instantly. It remains off for a while, but when I look an hour later, it has been activated again.
There have been almost no reboots of the router. That is not the problem.

0
0
#3
Re:disabled wireless keeps coming back on-Solution
2026-03-27 06:16:43 - last edited 2 weeks ago

Hello @mimble ,

Please ensure your firmware is updated to the latest version: VX800v(DE)_V1_0.18.0 Build 260203.

As far as I know, it will be fixed in the next firmware release. Please keep an eye out for future firmware releases.

Thank you for your patience and cooperation.

Welcome to Community！ Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
0
0
#4

Information

Helpful: 0

Views: 158

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.