How to set up QoS using TP-Link vr400 v3
How to set up QoS using TP-Link vr400 v3
Tags:
#Bandwidth Control/QoS
Model:
Archer VR400
Hardware Version: V4
Firmware Version: 1.6.0 0.9.1 v00a1.0 Build 250909 Rel.35514n
I'm subscribed to a up to 20 MBs download and1 MBs upload plan. I want to adjust the QOS settings.
on the bandwidth section only acceptable values 1 to 1000! is the modem doing it by percentage?
1 Accepted Solution
Re:How to set up QoS using TP-Link vr400 v3-Solution
Upload/|Download Bandwidth fields should accept an absolute values.
If you can enter a values between 1 and 1000 only, try these in your case:
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue as a "Recommended Solution".
BTC:149wubkkfoLmNDjDbiTxx4ZU8mpcMA5CJt
Re:How to set up QoS using TP-Link vr400 v3-Solution
Upload/|Download Bandwidth fields should accept an absolute values.
If you can enter a values between 1 and 1000 only, try these in your case:
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue as a "Recommended Solution".
BTC:149wubkkfoLmNDjDbiTxx4ZU8mpcMA5CJt