Need help with router
I am trying to set up ipv6 to be configured with /56 IPv6 prefix. At the moment I am only able to get /64 ipv6 prefix.
Appreciate some help please.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Links1,
Welcome to our community.
To configure IPv6 prefix delegation on your router, please follow these steps:
1. Log in to the router's web interface at http://tplinkwifi.net, and go to Advanced > IPv6.
2. Several Internet connection types are available: Dynamic IP (default), PPPoE, 6to4 Tunnel, IPv6 Bridge, DS-Lite, and V6Plus. If you are unsure which IPv6 connection type to use, please contact your ISP.
3. For detailed configuration instructions, refer to this FAQ: How to Set Up IPv6 on TP-Link Wi-Fi Routers
4. If your ISP provides prefix delegation (such as /56), you'll need to configure the "non-address" mode. Please refer to this FAQ for the specific configuration steps: How to set up IPv6 service for some specific ISP like BT/Hyperoptic or SKY etc on the wireless router
The prefix size (/56 vs /64) is typically determined by your ISP's configuration. Make sure to check with your ISP that they are indeed providing a /56 prefix delegation, and follow the configuration guide in FAQ 2942 to properly set up prefix delegation on your router.
- Copy Link
- Report Inappropriate Content
I tried passthrough bridge and it made my connection slow. And WiFi not working
My provider is starlink, which requires a router that supports DHCPv6-PD. For /54 prefix.
Does not use PPoE for ipv6.
The router I use is tp link AXE75
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 104
Replies: 2
Voters 0
No one has voted for it yet.