Home Network CommunityWi-Fi Routers maximum data transfer rate Archer be800
Wi-Fi Routers

maximum data transfer rate Archer be800

12

maximum data transfer rate Archer be800

maximum data transfer rate Archer be800
maximum data transfer rate Archer be800
2 weeks ago - last edited 2 weeks ago
Tags: #Wi-Fi 7 #6 GHz #MLO Network
Model: Archer BE800  
Hardware Version: V1
Firmware Version: 1.3.3 Build 20251015 rel.13041(4555)

I have an Archer be800 router. What is the maximum data transfer rate for this device in both 6 MHz and 5 MHz modes? And also in MLO mode (5+6 MHz)? I want to know the actual maximum data transfer rate!!! Not the numbers you have in a lab somewhere or on paper in your router manuals! My transfer rate is reportedly 2.5 Gbps maximum! But the packaging and online show completely different numbers; they're faster than mine! I don't understand why this is? Where's the problem!? I have an Asus ROG Strix G814jv gaming laptop (fast SSD drives, a powerful Intel i7 processor, 64 GB of DDR5 memory!), manufactured in 2023. I replaced the network card in my Asus laptop with an Intel Wi-Fi 7 be200. I also have a Samsung Galaxy S26 Ultra smartphone, which has high-speed UFS 4.1 memory and Wi-Fi 7 be. I want to know the real truth! I'm running a speed test from my Galaxy S26 Ultra to an Asus laptop, and I'm not entirely satisfied with the results. I don't have any iron, wood, or concrete obstacles. I don't have any other (foreign) Wi-Fi networks at 6 GHz frequencies; I have two Wi-Fi networks at 5 MHz and several at 2.4 MHz. All my equipment is located 3 meters away in the same room! I ran the speed test from the laptop to my smartphone and from the smartphone to the laptop using the Wi-Fi speed test program Open Speed ​​Test. There are no other devices connected to the Archer be800 router. I've attached a screenshot of the test to my message. Thank you.

File:
max.jpgDownload
  0      
0
#1
Options
17 Reply
Re:maximum data transfer rate Archer be800
2 weeks ago

  @ppredator83 

 

Here's a guide that you can use to measure the bandwidth of your router avoiding the ISP limitations.

This approach would give you the real bandwidth of your current hardware.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue as a "Recommended Solution". BTC:149wubkkfoLmNDjDbiTxx4ZU8mpcMA5CJt
  1  
1
#2
Options
Re:maximum data transfer rate Archer be800
a week ago

  @terziyski  This manual is full of generalities! The numbers in there don't correspond to reality! I need real numbers, not numbers on paper! This router's data transfer speed should be 4000 Mbps, but I'm only getting 2000 Mbps! Where's the other 50% of the speed? There's information on this forum about how the ECO mode in the firmware significantly limits the speed! Then disable the ECO mode on the Be800 router! I need full data transfer speed, not the energy-saving ECO mode!!!

  0  
0
#3
Options
Re:maximum data transfer rate Archer be800
a week ago - last edited a week ago

  @ppredator83 

 

To disable ECO mode on your TP-Link Archer BE800, you can log in to the router's web management interface and navigate to Advanced > System > ECO Mode. From there, turn off or adjust the Power Mode to Normal mode, Wireless Schedule, and LED Control according to your preferences - details.

Then you can make the same test as described above and compare if there's any difference.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue as a "Recommended Solution". BTC:149wubkkfoLmNDjDbiTxx4ZU8mpcMA5CJt
  0  
0
#4
Options
Re:maximum data transfer rate Archer be800
a week ago

  @terziyski Apparently you misunderstood me! Eco mode is built into the Be800 router firmware! Even if I disable it, the transfer speed remains the same! Eco mode for data transfer speed CANNOT BE DISABLED and has no effect! Did you understand me? Developers, remove eco mode from the firmware! I don't want it to limit my data transfer speed! The speed was supposed to be the maximum for my data transfer!!!!

  1  
1
#5
Options
Re:maximum data transfer rate Archer be800
a week ago - last edited a week ago

ppredator83 wrote

  @terziyski Apparently you misunderstood me! Eco mode is built into the Be800 router firmware! Even if I disable it, the transfer speed remains the same! Eco mode for data transfer speed CANNOT BE DISABLED and has no effect! Did you understand me? Developers, remove eco mode from the firmware! I don't want it to limit my data transfer speed! The speed was supposed to be the maximum for my data transfer!!!!

  @ppredator83 

 

Eco mode is not the culprit, sounds like you do not have 320mhz channel width enabled for 6ghz (the only way to get  higher than 2882mbps link rate and even then you need to be within a few feet of the router).

 

Not all wifi 7 devices with 6ghz band support 320mhz channel width. Most Wi-Fi devices only have 2 antennas and can only receive 2 spatial streams. You would need a device with 4 antennas and support 4 spatial streams to get higher than 2882 mbps over 5ghz /6ghz using 160mhz channel width on a be800 router.

 

Not all devices support MLO types that combine the frequencies (phones generally do rapid switching between frequencies instead of combining for higher link rate)

  0  
0
#6
Options
Re:maximum data transfer rate Archer be800
a week ago

  @MDA400 Where can I get firmware 1.0.6 for the be800 router? (The old firmware was the one that came with it, and the speed was higher!

  0  
0
#7
Options
Re:maximum data transfer rate Archer be800
a week ago - last edited a week ago

  @ppredator83 

 

You can't downgrade to older firmware at your current firmware version.

 

Make sure your 6ghz band has 320mhz channel width selected and that your 6ghz client devices (like your phone, laptop, etc) can use the 320mhz channel width.

 

Otherwise you will not see higher than 1.5 - 2 gigabits per second over wireless (unless you have a 4x4 wireless device which are very rare).

  1  
1
#8
Options
Re:maximum data transfer rate Archer be800
a week ago

  @MDA400 I only have 320 MHz here! I've never changed anything else here!

File:
Screenshot 2026-05-23 192831.jpgDownload
  0  
0
#9
Options
Re:maximum data transfer rate Archer be800
a week ago

  @MDA400 Tell me, how can you comment on messages in this forum? Скорость выгрузки Archer BE800 WiFi 7 (6 ГГц - 320 МГц) была полностью нарушена. - Сообщество домашней сети  I'm particularly interested in the message from 2026-01-07 05:33:10

I would like to see ironclad arguments and facts!!! And not just words, so that I can answer and forget this answer for me!

  0  
0
#10
Options
Re:maximum data transfer rate Archer be800
a week ago

ppredator83 wrote

  @MDA400 I only have 320 MHz here! I've never changed anything else here!

  @ppredator83 have you tried with higher transmit power? It's currently set to low in your screenshot.

 

What does the link rate show on your Samsung phone when you are right by the router?

 

If flow controlller is turned on under Internet and lan sections of the router, try turning them off and testing speed.

  1  
1
#11
Options
12

Information

Helpful: 0

Views: 463

Replies: 17

Tags

Wi-Fi 7 6 GHz MLO Network