Model : Archer VR2600
Hardware Version : Archer VR2600 v100000000
Firmware Version : 1.4.0 0.8.0 v0050.0 Build 160518 Rel.50944n
ISP : BT Infinity 2

1. Uptime Counter on Status Page

On my old BT Routers, I could easily see the system uptime, this was important to monitor disconnections. I checked this every day.

PLEASE give us an Uptime counter in the Status box of the Advanced page, this is massively important to highlight any line problems etc.

Also is there an easy way to see when disconnections happened in the router logs? This is also needed if not.

This again is important to identify any problems, such as what was happening with my old router. It was easy to see when disconnections occurred, see here: https://community.bt.com/t5/BT-Infinity-Speed-Connection/BT-SmartHub6-Connection-Routinely-Dropping/m-p/1690758/highlight/false#M228997



2: Extend 16 port limit in Virtual Server Page

As it says, a limit of 16 ports is bugger all, we REALLY need the ability to set more.

16 is stupidly low of a limit, my old router 10 years ago allowed more than that.

I'm aware port ranges can be used, but this can mean forwarding way more than needed.

Below I've pasted list of ports I normally forward for my various games and applications, (some, like Ventrilo don't work at all if not!), see how a limit of 16 is basically nothing?

I've already condensed a lot of them into ranges. I could forward ALL 46(!) of these on my previous routers:

TCP/UDP 2300-2400
TCP 47624
TCP/UDP 6073
TCP 6667
TCP 3783
TCP/UDP 27900
TCP 28900
TCP 29900-29901
TCP 13139
TCP 6515
TCP/UDP 6500
UDP 6700
UDP 12300
TCP/UDP 80
TCP/UDP 443
TCP/UDP 2099
TCP/UDP 5000-5500
TCP/UDP 8393-8400
UDP 16384-16640
UDP 6515
UDP 13139
UDP 27750
TCP/UDP 26220
TCP 8000-8020
UDP 64090-64110
TCP/UDP 27020-27050
TCP/UDP 27015
UDP 1200
UDP 27000-27014
UDP 9103
UDP 30350-30351
UDP 9987
TCP 30033
TCP 10011
TCP 41144
UDP 2011-2098
UDP 2100-2110
TCP/UDP 3784
UDP 6100
TCP 28910
TCP 29920
TCP 3724
TCP/UDP 6112
TCP 6881-6999
TCP 8086-8087
TCP 9081-9100