TPLINK 9980 and new Access Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TPLINK 9980 and new Access Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TPLINK 9980 and new Access Point
TPLINK 9980 and new Access Point
2017-01-11 16:15:29
Model :

Hardware Version :

Firmware Version :

ISP :

Hi,
i need connect a second AP to tplink-9980 with LAN Cable ;
i Connect Lan1 9980 to LAN1 new AP
LAN 9980 has segment 192.168.1.1 - 192.168.1.254 ( dhcp enable )
AP Dhcp disable - static 192.168.1.200

Now the Wifi of new AP it's connected and see LAN PC but I not have internet from client ( Cient connection : 192.168.1.201 - 192.168.1.1 - 255.255.255.0 )
from 9980 ( LAN cable ) I'm not enter to the AP web-page settings
from WIFI client AP I enter into web page AP

into Client LIST of 9980 i don't see the AP Address
It's necessary enable a new routing to AP ?

Regards
  0      
  0      
#1
Options
5 Reply
Re:TPLINK 9980 and new Access Point
2017-01-12 21:06:27
ANY SUGGEST ?
I have connected the AP to another router ( with the same address and DHCP enable ) via LAN cable and the AP it's connected fine !
the AP out on internet and the Client connected to AP see all LAN Client connected to router.

the same AP connected to 9980 ( same address IP range and DHCP enable ) it's connected but has internet disable.
The web-page of AP it's accesible only AP Client connected
from LAN ( main router ) it's inpossible open AP web-page configuration

ip Address router 192.168.1.1 - 200
ip Address static AP 192.168.1.150

Can you help me ?
  0  
  0  
#2
Options
Re:TPLINK 9980 and new Access Point
2017-01-13 04:21:41
Model of your AP? Cable between devices is ok?
  0  
  0  
#3
Options
Re:TPLINK 9980 and new Access Point
2017-01-13 15:13:30
HI,
thanks a lot for you response,
the AP is Nexcom IWF300, if connected to another 2 router ( alice telecom fibra VDSL modem and linksys wag 220 ) with the same LAN cable,
the AP has not problem,
with 9980 the AP is connected ( see correctly the LAN devices connected to 9980 ) but internet it's disable ...
its possible access to 9980 webpage only lan cable and not from AP WI/fi client
  0  
  0  
#4
Options
Re:TPLINK 9980 and new Access Point
2017-01-14 01:55:28
Sorry I don't know Nexcom IWF300, do you have typical AP configuration on this device?
  0  
  0  
#5
Options
Re:TPLINK 9980 and new Access Point
2017-01-16 15:00:41

jimasek wrote

Sorry I don't know Nexcom IWF300, do you have typical AP configuration on this device?

YES,
if connected to other router with LAN Cable, I have not problem.
The AP has a standard configuration ( Static IP - DHCP Disable ).
  0  
  0  
#6
Options