DNS problem with TL-PA4010KIT
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Version :
Firmware Version :
ISP :
Model : TL-PA4010KIT
Hardware Version : 1.3
Firmware Version :
ISP :
Region: Italy, H/W :V1.3, TP-LINK TL-PA4010P
Hy guys, i have a powerline network with TL-PA4010 adaptor. I connect the adaptor with the ethernet cable and everything seams ok, the speed is awsome. But after a few minutes of web browsering the connection crush and appears the error "DNS_PROBE_FINISHED_NO_INTERNET or DNS_PROBE:FINISHED_NXDOMAIN. if i restart the pc it seams to be ok, but after a few minutes it appears again. How can i permanently solve?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Unplug your router from your wall unit, wait for a while, connect it again and then try browsing,
Hope this method will help
- Copy Link
- Report Inappropriate Content
DNS_PROBE_FINISHED_NXDOMAIN error
Same problem, If anyone has seen this issue before or has an idea what might be causing it, please let me know.
- Copy Link
- Report Inappropriate Content
Hi,
What is the model number of the powerline adapters? Is it the same TL-PA4010?
What is the light status of the current adapters?
With your device connected to it, can you access internet?
Good day.
WagonR wrote
DNS_PROBE_FINISHED_NXDOMAIN error
Same problem, If anyone has seen this issue before or has an idea what might be causing it, please let me know.
- Copy Link
- Report Inappropriate Content
There are simple steps that can lead to solving these problems. It is likely that you would not require any expert help because you can perform many of these techniques by yourself.
The following are some of the steps you can adopt for solving the error DNS_PROBE_FINISHED_NXDOMAIN
Alter the DNS IP address
Flushing the DNS
Restarting the DNS Client
I hope you will fix your issue by performing the steps mentioned above.
- Copy Link
- Report Inappropriate Content
Many has this error working 100% fix is changing dns to 8.8.8.8 and 8.8.4.4
full guide with more methods howt o fix DNS_PROBE_FINISHED_NXDOMAIN
- Copy Link
- Report Inappropriate Content
@Mattcc Changing the DNS server fixed the issue for me as well.
- Copy Link
- Report Inappropriate Content
@phenom91 I've had a similar issue which may be related to yours.
I'm using a local DNS server (Pihole in my case) connected to a LAN port on the router, and the router is a TP-Link VR600.
I think there is an issue routing traffic between the router's wifi and LAN networks. However, when connected to a remote WiFi extender the issue doesn't occur. Fix for me is to turn off WiFi on the router (which stops me accidentally connecting to the router WiFi) or using a public DNS server instead. I suspect this might be repeated with other TP-Link routers using similar firmware.
- Copy Link
- Report Inappropriate Content
https://besttechytricks.com/create-memoji-and-animoji-on-ios-and-android
check website and comment your reviews....
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 20916
Replies: 8
Voters 0
No one has voted for it yet.